1.
Check for scores, nicks or burrs on the rack piston finished surfacSlight wear is normal on the worm gear surfaces.
检查齿条活塞抛光表面是否有刮痕、刻痕或磨擦。涡轮表面的轻微磨损是正常的。
2.
A minor scratch or abrasion.
擦伤一个轻微的擦伤或磨损
3.
Study on the Tribology Characteristic of Nano/micro Additives;
纳米/微米减磨剂的摩擦磨损特性研究
4.
These included two reports of minor burns and reports of minor property damage.
这两个报告轻微烧伤,轻微财产损失。
5.
Micro-mechanism and Control of Elastic-plastic Contact and Wear for Extrusion Forming Process;
挤压成形弹—塑性接触磨损微观机理及磨损控制
6.
The physical wearing process of 20+# steel by SBR is mainly resulted from the abrasion wear.
结果表明 ,2 0 # 钢被磨损的物理过程为磨粒磨损 (微切削 )。
7.
Micro-wear test of soft materials(Ⅰ)--Wear scar measurement and wear rate calculation
软材料的微磨损测试研究(Ⅰ)——磨痕测量与磨损率计算
8.
Study of Micrology Shape Analysis and Automatic Identification Technique for Wear Particles;
磨损磨粒的显微形态分析与自动识别技术研究
9.
Research on Micro-scale Abrasive Wear of TZNT Titanium Alloys in Simulated Body Fluid Environment;
模拟体液环境下TZNT钛合金微磨粒磨损研究
10.
Research on Micro-scale Abrasive Wear of TLM Titanium Alloys in Simulated Body Fluid Environment
人体腐蚀环境下TLM钛合金的微磨粒磨损研究
11.
Micro-abrasion Performances of TAMZ Alloy in Simulated Body Fluid
模拟体液环境下TAMZ合金的微磨粒磨损行为研究
12.
Study of Micro-scale Abrasive Wear Mechanism of Y-TZP Ceramic
热压烧结氧化锆陶瓷的微磨料磨损机制研究
13.
Study on the relationship between microtopography of brazed diamond and the abrasion of grinding grains
钎焊金刚石微观形貌与磨粒磨损状态关系研究
14.
Research on Mechanics Characteristics and Wear Mechanisms of Micro Milling Cutter;
微径铣刀的力学特性及磨损机理研究
15.
Research on Rotational Fretting Wear of Two Fe-C Alloy
两种Fe-C合金的转动微动磨损研究
16.
Fretting Wear Behavior of Alloy-800 at High Temperature
I-800合金高温微动磨损特性研究
17.
Research on gear′s fretting in wind power station
风电系统中加速齿轮的微动磨损研究
18.
Analysis of Fretting Wear and Fretting Protection for Wind Turbine Pitch Bearing
风力发电机变桨轴承微动磨损与防护