1.
Reinjecting a gas produced from an oil field into the reservoir is a coniinon practice.
把从油田采出的气体重新注入到油藏中去（气体回注）是一种常用的做法。
2.
Naturally, reinjection of gas reduces the pressure drop associated with producing oil from a field over a period of time.
当然，气体回注减缓了油井由于长时间生产而导致的压力降。
3.
DEMONSTRATION OF REINJECTION FORMATION AND CHOICE OF REINJECTION WELL IN TIESHANPO GASFIELD
铁山坡气田回注层位论证及回注井选择
4.
registered gas contractor
注册气体工程承办商
5.
Energy-conservation of the Residual Heat of the Flue Gas in a heavy-oil heating recovery steam injection boiler
稠油热采注汽锅炉烟气余热回收利用
6.
The engineering practice of offshore gas reinjection in LD10-1 oilfield
LD10-1油田天然气回注工程实践
7.
rotary body producer
回转炉体煤气发生炉
8.
NEW TECHNOLOGY OF INJECTION MOLDING:GAS-ASSISTED INJECTION MOLDING;
注射成型新工艺:气体辅助注射成型
9.
Outline of a New Software Package for Numerical Simulationof Cavity-filling of Gas-assisted Injection Molding;
气体辅助注射注气充填数值模拟软件的开发
10.
Application of Gas Analysis System in Converter Gas Recovery
转炉煤气回收气体分析系统及其应用
11.
Effects of concentration of Fe~(2+) and pH on corrosion of rejected wastewater in gasfield
Fe~(2+)含量及pH值对气田回注污水腐蚀的影响
12.
REINJECTION OILY WASTEWATER TREATMENT OF LOW PERMEABILITY OILFIELD BY GAS FLOTATION-BIOCONTACT OXIDATION-ULTRAFILTRATION PROCESS
气浮-生化-超滤工艺处理低渗透油田回注污水
13.
Scale Formation and Prevention on the pipeline surface of water injection system of gas field
气田回注水系统腐蚀结垢原因分析及防护
14.
Study on Gas Penetration during Gas-Assisted Injection Molding;
气体辅助注塑成型工艺中气体穿透的研究
15.
Study of Gas Penetration Behavior in Gas-Assisted Injection Molding
气体辅助注射成型气体穿透行为的研究
16.
Close attention is paid to supercritical fluids(SCF) because of their characteristics of both liquid and gas.
超临界流体因兼具液体和气体特性而倍受关注。
17.
inject air into a liquid mixture.
将空气注入一种混合液体
18.
New Application for Registration as a Gas Contractor
新申请注册为气体工程承办商