1.
There are three lifting holes and one lifting bolt hole on thefront and rear of the machine bed for plugging lifting hooks or bars.
床身前后共有三个起重孔和一个起重螺栓孔，用以插入起重工具。
2.
starter terminal stud
起动机线头接柱螺栓
3.
Analysis of Bolt Overheat in 220 kV GIS
一起220kV GIS螺栓发热分析
4.
Research on Causation of Weld Rupture of Bolt Fixing Main Trolley Rails After Main Lifting Capacity of Casting Crane Increased;
起重机增容后主小车轨道压板螺栓焊缝开裂研究
5.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
6.
These 2 parts are bolted together.
这两部份用螺栓拧在一起。
7.
Strength analysis for special bolt of large-scale hanger system
大型挂载起吊系统特种螺栓强度分析
8.
Reinstall handwheel and secure with retaining bolt.
重新安装手轮，用固定螺栓加固。
9.
Replace the body bolts and tighten evenly.
重新放置阀体螺栓，并均匀紧固。
10.
A jack operated by a screw.
螺旋起重机，螺旋千斤顶由螺旋杆运作的起重机
11.
double-screw bolt
螺柱，双头螺纹螺栓
12.
The various parts of the car are bolted together.
这辆汽车的各种配件是用螺栓装在一起的.
13.
screw-operated jack.
螺旋装置操纵的起重器。
14.
"Bolt: Mechanical fastener, usually used with a nut, for connecting two or more parts."
螺栓:通常与螺母一起用于连接两个或更多零件的机械紧固件。
15.
Install a new cam bolt, cam and new nut in the axlRe-align the reference marks.
在轴上安装新凸轮螺栓，凸轮和 新螺帽。重新校准参考标记。
16.
Gland Eye Bolts: Eyebolts swing aside for ease in repacking the stuffing box.
压盖有眼螺栓：有眼螺栓可以从旁边旋起，使得填料函的填料更换更加容易。
17.
Handle assembly is removed by loosening bolt and pulling upward. Remove the two hold-down bolts and lift index plate from valve.
通过松懈螺栓并拔出方法拆卸手柄总成。拆卸两个紧固螺栓，提起阀门上的刻度板。
18.
The flange gasket bolts for the gate valves should be retightened during installation as the bolts may have loosened due to storage and shipping.
在安装期间，闸阀上的法兰垫圈螺栓应该重新紧固，因为在库存和运输时螺栓可能会松懈。