1.
"There are holes under the reed valve that connect to the engine carburetor. When the piston is moving up, a partial vacuum is produced in the sealed crankcase.
在片簧阀的下面有孔道与化油器相连。当活塞向上运行时,就会在密封的曲轴箱里产生部分真空。
2.
The pressure which is Built up on the air-fuel mixture then causes it to flow up through the intake port into the engine cylinder when the piston moves down far enough to clear the intake port
压力使片簧阀关闭,这样,活塞进一步的向下运动压缩留在曲轴箱中的可燃混合气。
3.
Study on Superposition Throttle-Slice and Opening Valve Pressure of Hydro-pneumatic Spring
油气弹簧多片叠加节流阀片与开阀压力研究
4.
Influence of Elastic Modulus toValves Designing Parameters of Hydro-Pneumatic Spring
阀片弹性模量对油气弹簧阀系设计参数的影响
5.
Research for Working Characteristics of EQ1141G Automobile Air Compressor Reed Valve;
EQ1141G型汽车空压机簧片阀工作特性的研究
6.
Study on Adjust Shim Thickness and Affection to Throttle Opening Velocity of Hydro-pneumatic Spring
油气弹簧调整垫片厚度及对开阀速度影响
7.
Design Methods of Superposition Throttle Slices and Influence on Throttle Aperture of Hydro-Pneumatic Spring
油气弹簧叠加阀片设计方法及对节流缝隙影响
8.
Experiment and analysis of large deflection of throttle slice of hydro-pneumatic spring
油气弹簧环形节流阀片大挠曲变形分析与试验
9.
In succession, the author educed movement differential equation of reed valve plate from differential element of the plate according to theory of elastic plate libration.
接着本文根据弹性薄板振动理论,由薄板的微元体导出簧片阀阀片的运动微分方程。
10.
All this lay a better foundation for design and application of reed valve.
为高速复杂形状簧片阀的设计和应用奠定了一些基础。
11.
Abstract: Reed valve, high-speed and complicated in shape, is one of key parts in microengine.
文摘:高速复杂形状簧片阀是微型发动机关键零件之一。
12.
Reed valve, high-speed and complicated in shape, is one of key parts in microengine.
高速复杂形状簧片阀是微型发动机关键零件之一。
13.
Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.
拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
14.
The lower stem is encased in a spring which forces the stem away from the seat when the valve is opened.
下阀杆包裹在一个弹簧内部，当阀门开启时，弹簧迫使阀杆离开阀座。
15.
Remove valve spring and retainer.
拆卸阀弹簧和扣件。
16.
hydraulic relay valve return spring
液压式继动阀回动弹簧
17.
spring-loaded regulator
弹簧型自力式调节阀
18.
One of several metal strips forming a leaf spring.
簧片构成片簧的几个金属片中的一个