1.
The Technology of Numerical Control Reconstruction on the Injection Nozzle Center Hole and Inner Cone Grinder;
喷油嘴中孔座面磨床的数控改造技术
2.
aperture atomizer
喷孔式喷油嘴喷雾器
3.
A Numerical Study on the Process of Cavitation in a Real Diesel Nozzle
柴油机喷油嘴喷孔中空泡形成过程的数值模拟
4.
injector hole area
喷嘴孔的通过截面面积
5.
Study on Nozzle Wear Mechanism and Drilling Test of Swirling Abrasive Water Jet;
旋转磨料射流喷嘴磨损机理与钻孔试验研究
6.
The Research on the System of Testing the Angle of the Sealed Inclined Plane of Oil Nozzle Base on Multipage Image Comparison;
多页图像比对测量喷油嘴密封座面角度系统研究
7.
Research on Atomization Patterns for Cracks Hole Style Fuel Injection Nozzles
缝隙孔式喷油嘴偶件燃油喷注雾化形态的研究
8.
Technical Report of 625 EDM Machine Specially for Machining of Fuel Spray Nozzle Holes
625喷油嘴喷孔电火花加工专用机技术报告
9.
CFD Calculation of the Two-Phase Flow inside K-Factor Injection Nozzle
K系数喷油嘴喷孔内气液两相流动的三维模拟
10.
Three Dimensional Numerical Simulation of Flow Characteristic in Ultra-multi Hole Injector
超多喷孔喷油嘴流动特性的三维数值模拟
11.
diameter and number of hole
喷嘴量孔孔径及数目
12.
a container with a handle and a spout with a perforated nozzle; used to sprinkle water over plants.
有柄的容器和有穿孔的喷嘴的喷管；用于往植物表面喷洒水。
13.
Effect of VNT Nozzle Opening on Performance and Emissions of an Automotive Diesel Engine;
可变喷嘴涡轮增压器喷嘴截面积对车用柴油机性能的影响
14.
A high-velocity fluid stream forced under pressure out of a small-diameter opening or nozzle.
喷射流体在压力迫使下从小喷嘴或小孔中喷出的高速流体
15.
In respect of flexibility of regulating injection characteristics, the electronic unit injector is much better than that of traditional pump-pipe-nozzle system.
而在喷射特性调节的灵活性方面，共轨蓄压式电控泵喷嘴较传统的泵-油管-喷嘴系统有明显改善。
16.
Effect of Nozzle Diameters on the Distribution of Bubbles and Mass Transfer in Bubble Columns;
喷嘴孔径对鼓泡床内气泡分散和质量传递的影响
17.
Research on Micro-Spray-Hole EDM Machine Tool and the Control System
微细喷油孔电火花加工机床及其控制系统研究
18.
Experiment of drying rapeseed by spouted bed with a porous branch rotating draft tube
开孔支管旋转导向管喷动床干燥油菜籽试验