1.
The tristate driver circuit that interfaces with the main distributing frame and the transmit/receive filters. The drivers and filters are part of the port grouping.
与主配线板和发送／接收滤波器接口的三态驱动电路。驱动器和滤波器都是端口分组的一部分。
2.
Kanban-Based Cyclic Material Feeding for Production Line
基于看板的生产线物料循环配送方式
3.
Generalized Matching Equations for Slotted-waveguide Array Antenna Impedance Match
平板裂缝天线阻抗匹配的广义匹配方程
4.
Reasonable matching of wafer and wire: the advanced matching of wafer improves average voltage in electric field and current density of wafer corona, which the dedusting efficiency is higher.
板线匹配更合理。先进的板匹配，有效地提高了电场平均电压和板电晕电流密度，收尘效率更高。
5.
Slopping-lifed probes plate design is optional for easy maintnance and re-wiring on field.
针板可做为掀起式，以方便维修和配线修改。
6.
Spare parts: Product should with switch board, wiring box and platoon a place with a draught.
零配件：产品应附有开关板、接线盒和排风口。
7.
Terminal Board cable connection for quick replacement of the cap/cable assembly
接线端子板的电缆连接方式,便于电缆的迅速装配和更换
8.
"In electronics, a small length of cable with suitable end connectors for use in a patch panel."
在电子技术中，接线板上使用的两端带有配套插件的短电缆。
9.
Abstract: The design method of impedance matching for planar slot antenna is discussed in this paper.
文摘:本文对平板裂缝天线阻抗匹配设计方法进行了讨论。
10.
Production Line for Dalma Electronics( Suzhou) Co., Ltd. Their products are circuitry board and provide for SAMSUNG mainly.
达磨电子（州）限公司生产线，产品为线路板，主要为韩国三星电子做配套生产。
11.
metal-plate lens
(天线) 金属板透镜
12.
Regulation for design of tubing and wiring instrumentation
仪表配管、配线设计规定
13.
First the left ventricle is located using morphological method, then whose inner and outer contours are initialized using k-mean clustering, templet matching and the myocardium shape restoration based on skeleton.
然后用 K均值聚类、模板匹配和基于骨架的心肌形状恢复方法给出左心室的内外初始轮廓线 ;
14.
Bell&Ross? clock has been placed in the centre of the fascia panel, between two air vents, its typography matching the background of the instrument panel located in the driver's line of sight.
钟&罗斯?时钟一直存放在中心饰件,二者之间通气孔,其排印匹配背景仪表板设在司机的视线.
15.
The putting together of manufactured parts to make a completed product, such as a machine or an electronic circuit.
组装将生产的部件装配在一起使之成为一个完整产品，如机器或电子线路板
16.
Precise Calculation of Theoretical Plate Number Required for Cas Chromatography Separation--A Probabilistic Model of Nonlinear Adsorption/Partition Processes
气相色谱分离理论塔板数的精确计算——一个非线性吸附/分配过程的概率模型
17.
der-wire distributor
传号线分配器;联络线分配器;通知线分配器;指令线分配器
18.
chip on board process
基板上芯片装配工艺