1.
The carpenter up the joints of the table which had become louse.
木匠用螺丝钉把桌子上松动的木榫头固定。
2.
join pieces of wood with cogs.
用凸榫把多块木头连接在一起。
3.
a projection at the end of a piece of wood that is shaped to fit into a mortise and form a mortise joint.
一块木头的末端的一个突起，它可以插进去一个榫，形成一个榫接口。
4.
A joint so made.
榫头这样制成的榫头
5.
tenoning and through-mortising machine
榫头及贯通榫眼制造机
6.
Two tenons shall there be in one board, set in order one against another: thus shalt thou make for all the boards of the tabernacle.
每块木板要有两个榫头，彼此连接，会幕的一切木板你都要这样做。
7.
A usually rectangular cavity in a piece of wood, stone, or other material, prepared to receive a tenon and thus form a joint.
榫眼通常在一木头板、石块或其他物质中的四边形的洞孔，用来嵌入另一榫从而形成一个接合点
8.
KJV] One board had two tenons, equally distant one from another: thus did he make for all the boards of the tabernacle.
[新译]每块板有两个榫头，彼此相连接；帐幕一切木板，他都这样做。
9.
You have to try to handle the different rates at which the wood dries, so the joints get tight and durable.
你得处理好木料干燥后引起的不同的收缩率，以保证榫头紧固不松。
10.
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
槽口沿着一块木头或在其顶端附近的切口或槽口，可让另一块木头接合形成榫头。
11.
To be joined together by means of dovetails.
鸠尾榫接头用鸠尾榫结合在一起
12.
The carpenter gauged the dowel with calipers.
那木匠用卡钳估量暗榫。
13.
KJV] Two tenons shall there be in one board, set in order one against another: thus shalt thou make for all the boards of the tabernacle.
[新译]每块木板要有两个榫头，彼此连接，会幕的一切木板你都要这样做。
14.
Cup head nib bolts
GB/T13-1988半圆头带榫螺栓
15.
Flat countersunk nib bolts
GB/T11-1988沉头带榫螺栓
16.
Flat countersunk double nib bolts
GB/T800-1988沉头双榫螺栓
17.
tenoning and trenching machine
榫头切削和开槽两用机
18.
KJV] And thou shalt make forty sockets of silver under the twenty boards; two sockets under one board for his two tenons, and two sockets under another board for his two tenons.
[新译]在这二十块板底下，你要做四十个银插座；每块木板底下有两个插座连接它的两个榫头。