1.
Study on a New Method for Controlling Ink Thickness in Print Color Matching;
印刷配色中一种新型的墨层厚度控制方法的研究
2.
The Research on the Relationship between Density of Lithographic Ink and Ink Thickness;
胶印油墨叠印密度与墨层厚度关系的研究
3.
Analysis and Calculation of the Width and Thickness of Ink-jet Printing Film
喷墨印刷膜层宽度和厚度的分析计算
4.
Duct blade: A flexible steel blade which can be adjusted inrelation to the duct roller to regulate the thickness of the ink film which it carries during rotation.
墨槽刀片:软性钢刀片，可配合墨槽轴的转动作调校，控制带出的墨膜厚度。
5.
Experimental analysis on thickness control of variable thickness composite laminates during autoclave process
变厚度复合材料热压罐工艺层板厚度控制的实验研究
6.
Surface coating control model of hot dip aluminizing
热浸铝过程中表面层厚度动态控制模型
7.
The Important Problem during the Process of Current-pouring Floor;
在现浇楼板施工中保护层厚度的控制方法
8.
Realizing Study of the Current Control Influencing the Carbon Deposition of Electrode
影响电极积碳层厚度的电流控制实现研究
9.
Control Technology on Construction Thickness of Asphalt Concrete Pavement for Concrete Bridge Deck
水泥混凝土桥面沥青铺装层施工厚度控制技术
10.
The new-fashioned control trchnology of cold burden layer thickness for cement production line
水泥生产线篦冷机料层厚度新型控制技术
11.
The required thickness of coating is obtained by the action of closed circuit control system above the molten zinc level (air knife).
通过气刀和镀层闭环控制系统对液态锌层厚度的调节使镀层厚度达到设定要求
12.
2. In flat dip layer, the seam thickness control the stability of the wall rock, the thick-bedded hard rock is stable than the thin-bedded hard rock.
② 岩层厚度在缓倾斜时对围岩稳定起控制作用，厚层硬岩整体稳定性好于薄层状硬岩。
13.
Development and Application of High Accuracy Gauge Control for Plate Mill
中厚板高精度厚度控制的研究与应用
14.
Study on the New Technology of Hot-Dip Aluminizing of Iron and Steel and Its Surface Coating Control Model;
钢铁表面热浸镀铝新工艺及镀层厚度控制模型研究
15.
On-line detection and process control of coating thickness during robotic plasma spraying
机器人等离子弧熔射涂层厚度在线检测与过程控制
16.
The results prove that it is an effective method to controll the temperature of the substitute under spraying, and the thermal-shorck resistance is similar to the thin coating.
结果证明,控制喷涂中基体温度,是制备厚涂层的有效方式,其抗热震损伤性能和薄涂层相似。
17.
Construction Quality Control On Thick Gravel Layer Punch Pile
深厚卵石层冲孔灌注桩施工质量控制
18.
Analysis and Improvement of Thickness Precision Controlling for Automotive Sheet
汽车板产品厚度精度控制分析与改善