1.
The Research of Single Face Welding-Double Face Forming Automatic Welding Equipment;
单面焊双面成形自动焊接设备的研制
2.
Forming Process Research on Joint Vertical Welding from Single-face to Double-face of Low-alloy Steel Plate
低合金钢板对接立焊单面焊双面成形工艺研究
3.
Application of Single-Welding-Shaping-Two-Sides Technology in Welding of Tanker Metal Tank
单面焊双面成型工艺在罐体焊接中的应用
4.
Process model of arc corrugation on friction-stir weld
搅拌摩擦焊焊缝表面弧形纹形成模型
5.
Automatical EB Welding of Curved Weldment
工件平面曲线焊缝的电子束自动焊接
6.
Study on the Surface Coating of Welding Wire of CO_2-Gas Shielding Arc-Welding;
CO_2气体保护焊焊丝表面涂层技术探索
7.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
8.
Research on Welding Characteristics of EH36 Steel by Using Double-Sided Arc Welding
EH36钢厚板双面双弧立焊焊接特性研究
9.
Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.
等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。
10.
3. Apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
3. 在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
11.
apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
12.
monoside twin shots welder(KD-16)
单面双点点焊机（KD-16）
13.
narrow gap one-side automatic welding
窄间隙单面自动电弧焊
14.
internal undercut
焊道底边或内表面咬肉
15.
monoside twin shots welder(KD-17)
单面双点点焊机（kd-17）
16.
The bars were welded to the deck plate.
扁钢焊接在桥面钣上。
17.
A substance applied to a surface to be joined by welding, soldering, or brazing to facilitate the flowing of solder and prevent formation of oxides.
焊剂施于熔接或焊接以防止氧化、促进焊面结合的物质
18.
The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface.
底板用配套焊条焊接，使复层侧的焊缝与背衬板表面齐平。