1.
Sleeve 1;Sleeve 2;Screwed sleeve 1;Screwed sleeve 2
套筒 1;套筒 2;螺纹套筒 1;螺纹套筒 2
2.
EXPERIMENTAL STUDY ON THE PROPERTIES OF REBAR PARALLEL THREAD SLEEVE JOINT
钢筋滚轧直螺纹套筒连接性能试验研究
3.
The application of the reinforcing peel rib to roll press straight screw thread sleeve connection technique in bridges
钢筋剥肋滚压直螺纹套筒连接在桥梁中的应用
4.
Initial discussion on application of steel rolling straight thread sleeve connection technology
浅谈钢筋滚压直螺纹套筒连接技术应用
5.
The technology of the reinforced parallel thread coupler splicing of rebars and construction control
钢筋直螺纹套筒等强连接技术及其施工控制
6.
Application of the Collet Connection Technology for Pell off The Ribs and Rolling Plain Bar in Hot-Rolled Swirl Pool Project of Masteel 2250mm Hot Strip Mill While Against Construction;
钢筋剥肋滚轧直螺纹套筒连接技术在马钢新区热轧旋流池逆作施工中的应用
7.
Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
将衬套对准弹簧眼或U型钩眼，并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
8.
These rolls are corrugated cylinders, usually of the spiral type.
粉碎辊是波纹式滚筒，还常是螺旋割纹式。
9.
Install Sleeve SP-3194-B, Washer SP-534, and Nut SP-319
安装套筒SP-3194-B、垫圈SP-534和螺帽SP-3193。
10.
"Drill & tap for M16X2-1.38 Deep NPT,16 places for cover plate mounting screw"
钻孔,攻出一只M16X2-1.38深NPT螺纹,16处,该螺纹应与盖板固定螺丝配套
11.
Sleeve 1;Sleeve 2;Sleeve 3;Screwed sleeve 1;Screwed sleeve 2
套筒 1;套筒 2;套筒 3;旋拧套筒 1;旋拧套筒 2
12.
Male connector--Assembly
GB/T3734.1-1983卡套式锥螺纹直通管接头
13.
Male connector--Body
GB/T3734.2-1983卡套式锥螺纹直通接头体
14.
Male connector for butt joints--Body
GB/T3755.2-1983卡套式锥螺纹对接直通接头体
15.
Male elbow for butt joints--Assembly
GB/T3758.1-1983卡套式锥螺纹对接直角管接头
16.
Male elbow for butt joints--Body
GB/T3758.2-1983卡套式锥螺纹对接直角接头体
17.
Male elbow--Body
GB/T3739.2-1983卡套式锥螺纹直角接头体
18.
Male elbow--Assembly
GB/T3739.1-1983卡套式锥螺纹直角管接头