1.
Experimental Study of Down-coilers Hydraulic Automatic Jupping Control Technique
卷取助卷辊液压踏步控制性能的试验研究
2.
Wrapper Roll AJC Control Function of Tangshan Stainless Steel 1580mm Hot Strip Mill
唐山不锈钢1580mm热轧助卷辊AJC控制功能
3.
Application of Composite Control in Unit Roller's Automatic Jumping Control;
复合控制在助卷辊自动台阶回避控制中的应用研究
4.
emery-coated beam
金刚砂卷布辊，金刚导布辊
5.
batch roller (=batch rolling machine)
分批辊轧机,卷取机
6.
Diameter of punched driving roller is large, suiting rewinding of large and small roll.
复卷驱动辊直径大，适应大小卷径的复卷。
7.
"On the recoiler, there is a pressing roll, which position is controlled by a cylinder. "
卷取机上设有压辊,压辊升降由油缸驱动
8.
Research of Process and Equipment for Three Roller Plate Coiling of Level Adjust Below;
水平下调式三辊卷板工艺及设备研究
9.
Improvement for Hydraulic System of 20×2500 Four Roller Coiler
20×2500四辊卷板机液压系统的改进
10.
Adjustment in Rolling Conical Shell with Three Roller Machine and Improvement of Rolling Process
三辊卷板机卷制任意锥筒的调整计算及卷制过程的改进
11.
The Study and Application of Long Life Usage of Work-roll Bearing in the 3 500 mm Steckel Mill in Angang
安钢3500mm炉卷轧机工作辊轧辊轴承长寿命研究与应用
12.
W11 series synmmetric turn-up form three roll bendling machine, resing and flalling the up-roller of which all adot mechanical power drive.
w11 系列对称上调式三辊卷板机，上辊升降和两下辊旋转，均采用机械传动。
13.
After knitting, the fabric is carried to a roll at the base of the machine.
织物形成后,被送至机器下方的卷布辊上。
14.
The uncoiler and pinch rolls work together delivering the strip end to the shear.
开卷机及夹送辊同步工作送带钢头部至剪切机。
15.
Research and Application of NC System for Curve Down Three Roller Bending Machine
弧形下调式三辊卷板机数控系统研究及应用
16.
Study on the Working Rollers of Flexible Bending Technology
柔性卷板成形过程中工作辊的影响研究
17.
Heat treatment of gears of XW11S-100x4000 3-roll sheet-bending unit:Flaw and Measure
XW11S-100×4000三辊卷板机齿轮热处理缺陷及防止措施
18.
Automation Roll Change Program Optimization of ChengGang Hot Strip Plant Rougher
承钢热轧卷板厂粗轧机自动换辊程序优化