1.
deenergized contact
静合接点， 释放接点， 后接点， 失磁接点
2.
Quasi-Static Experiments of Steel-Concrete Composite Joints of Castellated Beams with Welded Compound Stirrup
焊接复合箍筋柱蜂窝梁组合节点的拟静力试验
3.
close-before-open contact
先合后断接点， 桥接点
4.
Static Behaviour of Overlapped KT-Type SHS Joints;
直接焊接KT型搭接方管节点静力性能的研究
5.
The joint formed by welding.
焊接点通过焊接形成的接合点
6.
Do not tamper with or damage grounding systems ; they are provided to prevent the accumulation of static electric charges which could act as a source of ignition.
不得损坏或破坏接地系统，它们可防止静电积累，静电也是点火源。
7.
Calculation of Critical Point of Power System Static Voltage Stability Based on Direct Method;
基于直接法的静态电压稳定临界点计算
8.
Research on Static Behaviour of Unstiffened Overlapped Circular Hollow Section K-Joints;
平面K型圆钢管搭接节点静力性能研究
9.
Quasi-static Experimental Study about Weak Axis of the Semi-rigid Joint;
弱轴半刚性连接节点的伪静力试验研究
10.
THE RESEARCH ON THE STATIC PERFORMANCE OF STEEL FRAME BEAM-COLUMN STEEL CASTING CONNECTIONS
钢框架梁柱铸钢件连接节点静力性能研究
11.
Quasi-static Analysis on Large-size Four Point Contact BallBearings with Negative Axial Internal Clearance
特大型负游隙四点接触球轴承拟静力学分析
12.
Static Analysis for Weld-Bonded Single-Lap Shear Joint with Multiple Weldspots
多焊点情况下胶焊单搭接头的静力分析
13.
Static hardpoints are present ? Dimensions matching specs ?
是否有静态挂载点？尺寸是否符合规范？
14.
INFLUENCE OF HYDROSTATIC PRESSURE ON THE PITTING BEHAVIOR OF Fe-20Cr Alloy
静水压力对Fe-20Cr合金点蚀行为的影响
15.
The point of contact of two abutting objects or parts.
接合点，结合器两物或两部分相接的那一点
16.
Finite Element Analysis on Static Behavior of Directly Welded K-Type and KK-Type Chs-Joints
直接焊接K型、KK型圆钢管节点静力性能的有限元分析
17.
Research on Process and Mechanism of Be/Cu-alloy Hot Isostatic Pressing Diffusion Bonding;
Be/Cu合金热等静压扩散连接工艺和机理研究
18.
Static and Dynamic Characteristics Analysis on the Junction of Inserted Type Composite Dam;
插入式混合坝接头部位静动力特性分析