1.
dead beaten stock
经过重刀打浆的浆料
2.
unbeatem pulp pulp pulp pulp pulpv
未经打浆处理的纸浆
3.
This book is just a scissors-and-paste job.
这本书不过是用浆糊和剪刀剪接成的。
4.
Determination of beating degree for pulps (Schopper-Riegler method)
GB/T3332-1982浆料打浆度的测定法(肖伯尔-瑞格勒法)
5.
It is made by adding a large quantity of mineral loading such as china clay, to the pulp in the beater and made very smooth by calendering.
造纸时，在打浆机内混入含大量瓷土的填料，经砑光机打磨平滑而成。
6.
Engine sizing: Sizing materials added to the pulp in the beating machine or refiner rather than at a later stage during paper making.
机内施胶:在打浆机或精磨机内把胶料加入纸浆内而不是在造纸的较后过程中加胶。
7.
Research on acrylic acid size and its application in warp sizing
丙烯酸浆料的研制及其在经纱上浆中的应用
8.
Application of inorganic nanometer size auxiliary agent in warp sizing
无机纳米浆料助剂在经纱上浆中的应用
9.
Through defibrination disposal, it can im-prove tensile strength of fibre, break intensity, binding strength and freeness within the inner fibre.
经过磨浆处理，可使纤维的抗拉强度、裂强度，纤维内部的结合强度和打浆度均有提高。
10.
Other sizes behave in a somewhat similar manner and the temperature of the size liquor and the time factor both affect the viscosity with similar effects on the ultimate size add - on.
其它浆料的行为与前述大致相同。浆液的温度和煮浆时间会影响粘度及最终浆纱的加重率。
11.
hard beating pulp
高打浆度纸浆粘状浆
12.
5.2 Slug the pipe with two cubic meters of mud before pulling out.
起钻前打进两方重泥浆。
13.
Precision-machined, bottom and top edges provide shearing action for pulp stock and slurry.
底部和顶部边缘经过精密机加工，对纸浆原料和浆液具有剪切作用。
14.
Relationship of Cellulase Enzyme Treatment and Beatability,Filler Retention of Hardwood Pulp
纤维素酶处理与阔叶木浆打浆性能和填料留着的关系
15.
If the yarn contains too much size by weight, it will tend to be brittle and, as a result, an excessive number of end breaks will occur.
如果纱线所含的浆料过多,纱线会发脆,这会引起经纱的大量断头。
16.
Excess acidity is corrected in the slurry storage tanks.
过量的酸在料浆贮槽中进一步中和。
17.
This paper studied the influence of pulp species and beating degree of filler furnish on the properties of manila board.
本文通过实验研究了芯浆种类、打浆度对白板纸性能的影响。
18.
resin-in-pulp process
矿浆料离子交换过程