1.
involute spline gear shaper cutter
![点击朗读](/dictall/images/read.gif)
渐开线花键孔插齿刀
2.
involute spline gear shaper cutter with taper shank
![点击朗读](/dictall/images/read.gif)
锥柄渐开线花键孔插齿刀
3.
Ventricular Puncture through Key Point Applied with Software of UniWeb Viewer;
![点击朗读](/dictall/images/read.gif)
应用UniWeb Viewer探讨经关键孔脑室穿刺的方法
4.
To check the results of keypunching.
![点击朗读](/dictall/images/read.gif)
检查击键打孔的结果。
5.
Perforator: Key board which produces prunched paper tape.
![点击朗读](/dictall/images/read.gif)
打孔机:把纸带打孔的键盘。
6.
Study on the Key Issues of the Optical Sparse-Aperture Imaging Systems;
![点击朗读](/dictall/images/read.gif)
光学稀疏孔径成像系统关键问题研究
7.
Study on Control System and Key Technologies of Pressing Powder for Perforating Charge;
![点击朗读](/dictall/images/read.gif)
射孔弹压药控制系统与关键工艺研究
8.
Key Technique in the Design and Manufature of 350t Capacity Well-hole Wagon;
![点击朗读](/dictall/images/read.gif)
350t落下孔车设计与制造关键技术研究
9.
The Key Technical Research on Healthy Larva Breeding of Haliotis Diversicolor Supertexta;
![点击朗读](/dictall/images/read.gif)
九孔鲍健康鲍苗生产的关键技术研究
10.
Study on Key Techniques for Interferometric Synthetic Aperture Radar Measurement;
![点击朗读](/dictall/images/read.gif)
干涉合成孔径雷达测量关键技术研究
11.
Improvement of spline rod and set of piercing die forbasket type cage
![点击朗读](/dictall/images/read.gif)
筐形保持架冲孔模花键杆、套的改进
12.
Tape Printing;Tape Perforating;Tape Printing/Perforating;Page Printing;Keyboard;Facsimile
![点击朗读](/dictall/images/read.gif)
带式印刷;纸带穿孔;带式印刷/穿孔;页式印刷;键盘;传真
13.
A keyboard-actuated punch that punches holes in a data medium.
![点击朗读](/dictall/images/read.gif)
一种由键盘操纵的穿孔设备,用以在数据载体上进行穿孔。同keyboardpunch。
14.
A keyboard machine that is used to punch holes in cards or tapes for data-processing systems.
键盘穿孔机一种键盘机器,用于为处理信息系统而在卡片或磁带上打孔
15.
a mechanically operated piano that uses a roll of perforated paper to activate the keys.
![点击朗读](/dictall/images/read.gif)
用滚动的穿孔纸激活键盘的自动演奏的钢琴。
16.
Study on Some Key Problems of Synthetic Aperture Radar Antenna Technologies
![点击朗读](/dictall/images/read.gif)
合成孔径雷达天线技术的若干关键问题研究
17.
A Research on Key Technologies of Hole-Axis Assembling Robot Guided by Visual System;
![点击朗读](/dictall/images/read.gif)
孔—轴装配机器人视觉制导关键技术研究
18.
The Pivotal Technology and Academic Analysis of NC on Noncircular Cross Section Roller;
![点击朗读](/dictall/images/read.gif)
环状孔轧辊数控加工机床关键技术和理论分析