1.
Numerical Simulation of Electrolytic Nickel Board's Cutting Process and Shear Stress
电解镍板剪切过程数值模拟及其单位剪切抗力的确定
2.
Simple Model of Stiffness of Short-leg Shear Walls With Shear Deformation;
考虑剪切变形的短肢剪力墙结构简化模型及抗震性能研究
3.
Relationships between anti-shearing force and quality properties of wheat grain
小麦籽粒抗剪切力与其品质性状的关系
4.
Triaxial shear test on anti-shear properties of asphalt mixture
沥青混合料抗剪性能的三轴剪切试验
5.
Shear Resistance Behavior of Steel-Plate Shear Wall and Steel-Concrete Composite Shear Wall;
钢板剪力墙和组合剪力墙的抗剪静力性能
6.
magnetohydrodynamic shear heating
磁流体动力剪切加热
7.
maximum shear stress yield criterion
最大剪切应力屈服条件
8.
Calculation of Force and Energy for Crank Flying Shear
130X130曲柄飞剪剪切力能参数计算
9.
Experiment Research on Cutting Performance of Recycled Concrete and Shear Performance of Recycled Concrete Beam;
再生混凝土剪切性能和梁抗剪性能试验研究
10.
Ebonite--Method of test for shearing strength
GB/T1700-1982硬质橡胶抗剪切强度试验方法
11.
Experiment study on shear characteristics of saturated rock mass
饱和状态下岩体抗剪切特性试验研究
12.
Anti-shear Property of Drag Reducer Prepared by Bulk Polymerization
本体聚合油溶性减阻剂的抗剪切性能
13.
The ratio of the magnitude of an applied shear stress to the velocity gradient that it produces; that is, a measure of a noncrystalline material's resistance to permanent deformation.
剪切应力数值与其产生应变速率的比值叫粘性，用来衡量非晶材料抵抗永久变形的能力。
14.
Non-linear Finite Element Analysis of Low-Rise Shear Wall's Shear Strength
低剪力墙抗剪承载力的非线性有限元分析
15.
Analysis of Factors on Shear Strength of Reinforced Concrete Shear Walls
影响钢筋混凝土剪力墙抗剪承载力因素分析
16.
SHERA RESISTANCE BEHAVIOR OF TWO-SIDE CONNECTED STEEL-PLATE SHEAR WALL(SPSW)
两边连接钢板剪力墙抗剪静力性能研究
17.
The Experiment on the Performance of the Shear Connector in Embedded Composite Beams to Resist Punching
腹板嵌入式组合梁中抗剪连接件抗冲切试验
18.
Seismic Shear Capacity for Brick Masonry Wall Strengthened with GFRP
GFRP复合材料加固砖墙抗震抗剪承载力