1.
The prefabricated parts can also be made.
高温热风管道内衬，加热炉内衬等部位，可制成预制构件。
2.
Used for lining in blast furnaces ,hot air stoves ,coke ovens and other industry furnaces.
用于各种工业炉窑的耐火内衬，如高炉、热风炉、加热炉、均热炉、锅炉等。
3.
Used for lining in blast furnaces, hot air stoves, coke ovens and other industry furnaces.
用于各种工业炉窑的耐火内衬，如高炉、风炉、热炉、热炉、炉等。
4.
refractory-lined chamber
耐火材料内衬加热室
5.
Research on Intensifying Heat Transfer in Square Tubular Furnace;
方箱管式加热炉炉内的强化传热研究
6.
The interior of the storage tank shall be lined with a special resin coating.
热水炉容器内胆应该内衬特殊的树脂涂层。
7.
"The furnace lining is made from light high alumna, light chamotte, insulating plates. "
炉子内衬由轻质高铝砖,轻质粘土砖,绝热板组成。
8.
Numerical Simulation of Flow and Heat Transfer in Billet Reheating Furnace;
大型步进式加热炉炉内流动与传热的数值模拟
9.
Numerical Research on the Flow Character of the Whole Regenerative Heating Furnace
蓄热式步进加热炉炉内流动特性的数值模拟
10.
The Flow Pattern and Pressure Transient Characteristics of Regenerative Annular Furnace at Cold State;
高炉煤气双预热蓄热式环形加热炉冷态炉内流场及暂态特性
11.
Pressure Fluctuation Caused by Switchover and Pressure Control Method of Large-Scale Regenerative Heating Annular Furnace
双预热蓄热式环形加热炉炉压控制及换向对炉内压力波动的影响
12.
Engineering technical requirements of refinery tube heater light weight heal-resistant lining made of hight alumima cement,haydite and vermiculite
炼油厂管式加热炉高铝水泥陶粒蛭石轻质耐热衬里工程技术条件
13.
Numerical Modelling of NOx Formation in Regenerative Heater
蓄热式加热炉内NOx生成的数值模拟
14.
NUMERICAL SIMULATION OF HEAT FIELD IN LENGTHWISE GRAPHITIZATION FURNACE DURING HEATING PROCESS
内热串接石墨化炉加热过程热场数值模拟
15.
Mathematical analysis of the non-steady-state temperature field of furnace lining and billet in heating process
炉衬和钢坯加热过程中非稳态温度场的数学解析
16.
A DISCUSSION ON COKE DEPOSITION IN FURNACE TUBES OF DELAYED COKING UNIT
延迟焦化加热炉炉管内结焦问题的探讨
17.
Supervision of Furnace Thermal Current Intensity and Prediction of Furnace Lining Thickness;
高炉热流强度的监测与炉衬厚度预报
18.
The shell and cover of the waste gas preheating section and NOF heating furnace.
炉气预热段及NOF加热炉的炉壳及炉盖;