1.
digital programmable set and readout temperature controllers for all zones coupled to solid-state relays for accurate heat control.
每个加热区的数字可编程温控同固态继电器连接获得准确的加热控制。
2.
FROM THE TCM LINK CONNECTOR TO THE RELAY CONNECTOR
从ＴＣＭ连接接头到继电器接头。
3.
This relay connects one input to one output.
该继电器将一个输入连接到一个输出。
4.
PCB or Quick Connecting Terminal, Available for Automotive Applications.
用于汽车设备的PCB或者快速连接的汽车继电器。
5.
TCM connector, Trans relay or relay connector
ＴＣＭ接头，变速继电器或继电器接头
6.
In this diagram, a single-pole normally open relay is controlling the connecction of the voltage source to the lamp.
在该图中，一个单刀常开继电器控制着电压源和照明灯之间的连接。
7.
earthing cable bond
电缆铠甲的接地连接器
8.
BACK-UP LAMP RELAY CONNECTOR
备用车灯继电器接头
9.
TRANS CONTROL RELAY CONNECTOR
变速箱控制继电器接头
10.
flash and ground protecting relay
闪燃和接地保护继电器
11.
neutral relay with heavy duty contact
无极加强接点继电器
12.
Connecting the FlexNet FNT/FNB Series (Trunk and Bridger)
连接 FlexNet FNT/FNB 系列（中继线和桥接器）
13.
NOTE: MAKE SURE THE JUMPER WIRE IS STILL CONNECTED BETWEEN THE TWO RELAY CONNECTORS.
注：必须保证在两个继电器接头之间的跳线是连上的。
14.
a cord to conduct power to an electrical appliance.
连接电源和用电器的线。
15.
Install the defogger relay by aligning the relay terminals with the cavities in the junction block and pushing the relay firmly into place.
对准接线盒中有孔的继电器端子，安装除雾继电器，并把继电器插牢。
16.
Install the horn relay by aligning the relay terminals with the cavities in the junction block and pushing the relay firmly into place.
安装喇叭继电器：将继电器端子与接线盒中的插孔对齐，插紧继电器。
17.
PCB or Quick Connecting for Popwer Switching, for Prepay Meter System, Power Station, Electric Motorbike System.
用于电力开关、预测系统、发电站、电动摩托车的PCB或快速连接的磁保持继电器。
18.
umbilic(al) connector
临时管道及电缆连接器