1.
Study of the Wing Shape of Flapping-Wing MAV
扑翼飞行器机翼平面形状设计方法研究
2.
Calculation of the Drag of Wings with Arbitrary Planform by Use of Network Method at Supersonic and Subsonic Speed
用网格法计算任意平面形状超、亚音速机翼阻力
3.
Maneuver Load Optimal Distribution Between Canard and Horizontal Tail of Three-surface Aircraft
三翼面飞机前翼和平尾机动载荷优化配置
4.
An aircraft whose horizontal stabilizing surfaces are forward of the main wing.
鸭式飞机水平稳定面在主机翼前方的飞行器
5.
A control surface on an airplane that combines the functions of an elevator and an aileron.
升降副翼兼有升降舵和副翼两种功能的飞机控制平面
6.
Numerical Simulation of Using Blade Tip Winglet in Plane Compressor Cascade
压气机平面叶栅加装叶尖小翼的数值研究
7.
Experimental Investigation on Flow Field Around Blade-tip Airfoil Section of Horizontal-axis Wind Turbine
水平轴风力机叶尖翼型截面流场的试验研究
8.
A Study on Two-level Optimization Approach for Aerodynamic Design of Wing Shape;
面向机翼气动外形优化的二级优化方法研究
9.
A slightly arched surface, as of a road, a ship's deck, an airfoil, or a snow ski.
弧面稍呈弧形的表面，如路面、船甲板、机翼面或滑雪板
10.
aileron: hinged part of the wing of an aircraft,used to control its balance while it is flying
副翼（飞机的机翼上控制飞行平衡的活动辅助翼）.
11.
total wing area
机翼总面积(含机身部分)
12.
Shape Parameter Optimization for Wing and Wingtip Based on RBF
基于径向基函数的机翼和翼梢小翼外形优化
13.
The upward or downward inclination of an aircraft wing from true horizontal.
上反角，下反角飞行器的机翼与水平面向上或向下的倾斜角
14.
On Conformal Transformation Constituted by the Function of Wing’s Section, It’s Inverse Function and Their Application;
机翼剖面函数及其反函数构成的保形变换与应用
15.
Empennage-Install Stabilizer and Vertical Fin.
尾翼－安装水平安定面、垂直安定面。
16.
RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING
卷边翼缘工形变截面构件在压弯荷载作用下平面内稳定承载性能研究
17.
one of the horizontal airfoils on either side of the fuselage of an airplane.
飞机机身的任何一方的水平机翼。
18.
The Joukowski airfoil problem is the simplest application of conformal mapping to airfoil design.
joukowski问题是最简单的翼型形映射应用到机翼设计.