1.
Failure Analysis on Bearing with Dowels Welded to Frame in Huge Roll Mill
大型轧机柱销焊接保持架轴承失效分析
2.
Machine frame and tool rest are welded systematically.
◆ 机架，刀架采用整体焊接结构，经振动消除应力，精度保持性好。
3.
Welding the Carriage Framework Analysis of the Familiar Blemish to the CO_2 Protection;
对CO_2保护焊焊接车身骨架常见缺陷的分析
4.
The welding conditions should always be neutral or slightly oxidizing.
焊接气氛必须永远保持中性或微氧化。
5.
New Globe-tube Soldering Techoology of Soldering Hollow Globe-Net-Shelf Struct ure;
焊接空心球网架结构球—管焊接新工艺
6.
Microstructures and Mechanical Properties of the Welded Joints in Bogie Frame;
转向架构架焊接接头组织与性能研究
7.
The Study on Indirect Squeeze Casting of the Larger-diameter Retainer;
大直径轴承保持架间接挤压铸造的研究
8.
Application of CO_2 Gas Protective Welding to Medium Thickness Plate
CO_2气体保护焊在中厚板焊接中的应用
9.
Analysis for the Welded Empty Sphere Joint with Incompletely Filled Groove Defect;
含未焊透缺陷网架焊接空心球节点应力分析
10.
Welding Defects of Submerged Arc Welding of Box Derrick and the Countermeasures
箱体井架埋弧焊的焊接缺陷及其防止对策
11.
Research on Welding Procedures and Welded Joint Properties of Domex700MC HSLA Steel by Dioxide Gas Shielded Arc Welding Process;
Domex700MC低合金高强钢CO_2气体保护焊焊接工艺及焊接接头性能研究
12.
Application of Argon Free Welding Flux for P91 Steel Welding
免充氩焊接保护剂在P91钢焊接中的应用
13.
Leaving the disc in a fully closed position firmly closed also prevents weld spatter from falling directly onto the mating faces of the seat and disc.
保持阀瓣处于完全关闭位置也能够避免焊花直接掉在阀座和阀瓣的连接面上。
14.
Leaving the valve in a fully closed position helps prevent weld spatter from falling directly onto the mating faces of the seats.
保持阀门处于完全关闭状态，有助于防止焊花飞溅直接落到阀座连接面上。
15.
Test method for weld strength of getter support
GB/T9506.11-1988吸气剂支架焊接强度测试方法
16.
The all-welded, A-frame pylon straddles the deck.
全焊接的A形框架式的塔柱与桥面叉开。
17.
A specialized burning rack is used in the second step.
在第二阶段，使用一个专用的焊接架。
18.
Series Design of Ben Frame welded with Thick Plate for Light Bus
轻型客车厚板焊接弯车架的系列设计