说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 管道阀
1.
Exposition & key points of implement for API 6D (pipeline valves,twenty-third edition)
API6D管道阀门(第23版)解读
2.
Application of CFD Method in Calculation of Water Hammer for Pipe Valve
CFD技术在管道阀门水击计算中的应用
3.
To block off or obstruct(a pipe or valve, for example.
阻塞(如管道或阀门)
4.
Detach the sensing line from the inlet ball valve and the elbow on the relief valve.
从进口球阀和安全阀上的弯头处拆卸感应管道。
5.
Globe pattern stop-check valves can be used in horizontal piperuns with the stem straight up.
截止阀类型的节流止回阀可以用在水平管道上,阀杆垂直向上。
6.
Do not allow any pipe dope into valve body in order to avoid damage to disc and seat.
不要让任何管道粘接剂流入阀体内,以避免损坏阀瓣和阀座。
7.
Grooved butterfly valves direct connect to pipe using iron pipe size couplings. Grooved valves are easiest to install.
管状蝶阀:采用铸铁管接头直接与管道连接。管状阀门安装最容易。
8.
Elastomeric seat materials are not suitable for steam service.
弹性阀座材料不适合于蒸气管道中。
9.
CBV angle-style valves are designed to replace piping elbows.
CBV角型阀门可用于取代管道弯头。
10.
The body is not designed to support the piping weight.
但是,这种阀体不适用于支撑管道重量。
11.
Applicable to NIBCO INC. Plumbing and Heating Valves only.
仅适用于美国尼伯科管道与供暖阀门。
12.
Discussion on calculation of hydraulic power in fixing pipe with time-delay and self-closing valve;
装设延时自闭阀管道的水力计算探讨
13.
"When threading pipe, gauge pipe threads for size and length to avoid jamming pipe against seat and disc."
当对管道进行攻丝时,要测定管道螺纹的尺寸和长度,避免将管道塞满阀座和阀瓣。
14.
Three-way valve has three entrances and pipes, equivalent to two single-Block valves synthetic one.
三通阀有3个出入口与管道相连,相当于两台单座阀合成一体。
15.
Circuit Balancing Valves may be packaged with the balance of the NIBCO Commercial/Mechanical Valve line.
流量平衡阀可被用于平衡美国尼伯科的商用/机械式阀门管道。
16.
hose connection valve
软管联结阀软管连接阀
17.
HKV mainly produces API forged and cast steel valves, Chinese standards high-medium pressure valves, forged flanges as well as piping assessories.
华凯阀业主要生产API标准锻钢及铸钢阀门、国标高中压阀门、锻钢法兰及管道附件等。
18.
The line pressure required to open the valve is a function of the disc/piston weight and the size of the port diameter.
开启阀门所需要的管道压力取决于阀瓣/活塞的重量和阀门端口直径的综合作用。