1.
Remove the five screws that secure the battery tray to the vehicle.
拆下固定电池架到车身的五个螺丝。
2.
Analyses of Solid Oxide Fuel Cells (SOFCs) Stability
固体氧化物燃料电池(SOFC)电池稳定性分析
3.
A Photovoltaic System with Voltage-Based Maximum Power Point Tracking;
基于固定电压法的太阳能电池MPPT控制芯片
4.
Stationary acidspray-proof lead-acid batteries-Capacity specifications and size
GB/T13337.2-1991固定型防酸式铅酸蓄电池规格及尺寸
5.
Stationary acidapray-proof lead-acid batteries Technical conditions
GB/T13337.1-1991固定型防酸式铅酸蓄电池技术条件
6.
Hydrogen Source for Fuel Cell--Optimization of Ethanol Reforming for Hydrogen Production through Double-sector Fixed Bed
燃料电池氢源——双段固定床优化乙醇重整制氢
7.
solid-electrolyte fuel cell
固体电解质燃料电池
8.
Test and Operation Analysis on Charging and Discharging of Stationary Valve-regulated Lead-acid Battery Group
固定型阀控式铅酸蓄电池组充放电试验与运行分析
9.
Research and development of ceria-based electrolyte on intermediate-temperature solid oxide fuel cells
CeO_2基固体氧化物燃料电池电解质研究
10.
The salts may be used to make solid-state batteries.
这些金属盐可用来制造固体电池组。
11.
Photovoltaic cells are a product of modern solid-state physics.
光电池是现代固体物理学的产物。
12.
The Modeling and Simulation for Solid Oxide Fuel Cell;
固体氧化物燃料电池（SOFC）的建模与仿真
13.
Research on Fabrication Process of Intermediate Temperature Solid Oxide Fuel Cell;
中温固体氧化物燃料电池的制备工艺
14.
Study of Anode Materials in Solid Oxide Fuel Cell;
固体氧化物燃料电池阳极材料的研究
15.
Investigation on the Stacks of Single Chamber Solid Oxide Fuel Cells;
单气室固体氧化物燃料电池组的研究
16.
Performance Investigation of H_2S/air Solid Oxide Fuel Cell
H_2S/air固体氧化物燃料电池的性能研究
17.
Three-dimensional numerical simulation of solid oxide fuel cell
固体氧化物燃料电池的三维数值模拟
18.
Theoretical Analysis of Tritium Separation by Solid Polymer Electrolyte
固体聚合物电解池分离氚的理论分析