1.
work-holding jig, for machine tools
工具机工件夹紧用夹具
2.
clamp, work-holding, for machine tools
机床工件夹紧用夹具
3.
chock, work-holding,for machine tools
机床工件夹紧用塞块
4.
centre, lathe, work-holding
车床工件夹紧用顶尖
5.
The Simultaneous Optimization of Fixture Layout and the Clamping Sequences for Weak Stiffness Workpiece
弱刚度工件夹紧顺序与夹具布局的同步优化
6.
Analysis of Positioning and Clamping for Workpiece in Machining Center
工件在加工中心上的定位与夹紧分析
7.
the bed of a machine tool to which the work is clamped.
工件被夹紧的机床的床身。
8.
Improvement of chucking method and part axle of 3MZ3210 super lapping machine
3MZ3210超精研机夹紧方式及工件轴的改进
9.
Finite Element Analysis for the Deformation of Workpiece Under the Fixture Forces
夹紧力作用下工件变形的有限元分析
10.
Processing Technology of Clamp Holder of Clamper of Protective Cap of Oil Tank and Clamp Design
油桶保安盖锁紧器夹紧块的加工及夹具的设计
11.
Four boundary conditions, such as fixed clamp, moving clamp, hinge support and simple support, are considered.
文中考虑了固定夹紧、移夹紧、支承及简单支承等4种边界条件.
12.
Influence on clamping error of spares of contact surface quality;
接触表面质量对零件夹紧误差的影响
13.
Set as Toolbar Folder
设置为工具栏文件夹
14.
To machine(an object)with the aid of a jig.
用夹具辅助加工（一物件）
15.
Work-holding devices are called jigs and fixtures.
工件夹持装置叫做钻模或夹具。
16.
Influence of Clamping Forces on Radial Rigidity of AHO Tooling System
夹紧力对AHO工具系统径向刚度的影响
17.
The work-piece must be clamped tightly in jaw vice. Be careful and do not hurt fingers when fixing small work-pieces.
工件必须牢固地装夹在虎钳上，装夹小工件时须防止钳口夹伤手指。
18.
A CAD Method of Clamp Plan for Dowel Pin Modular Fixture and Founding of Parts Data Base;
孔系组合夹具夹紧方案的CAD方法及元件库的建立