1.
After operating from high temperature, the Shutoff must be manually reset (opened).
在高温操作后，关闭阀必须人工重置(开启)。
2.
For noncatalytic operations at high temperature the agglomeration and sintering of fine particles can necessitate a lowering in temperature of operation.
对于一些高温非催化操作，由于微粒易于聚集和烧结，不得不降低操作温度。
3.
The present paper analyzes the difficult points in refining the high carbon steel by converter and describes its operating essentials, which include good control of the carbon temperature and properly slagging for dephosphorization purpose.
分析了转炉冶炼高碳钢的难点，探讨了转炉冶炼高碳钢的操作要点：控制好碳温、好造渣脱磷操作。
4.
The main advantages of freeze concentration, over evaporation and membrane processes are high product quality due to low-temperature operation and the absence of a vapor-liquid interface.
冷冻浓缩胜过蒸发和膜操作的主要优点是低温操作和无气液界面而使成品质量高。
5.
Eatablish to have the position. electric leakages swith. deend the ice to protect with heat, insure to operate the absoluteness the safety.
设有相位制,漏电开关,防冰保护和高温保护,确保操作绝对安全。
6.
Quicktly cooling capability and good design ensure a stable temperamre of the operation desk after long term work.
高效率冷冻能力，设计确保光台面长时间操作之稳定温度。
7.
Eatablish to have the position.electric leakage switch.defend the ice to protect with heat,insure to operate the absoluteness the safety.
设有相位制、漏电开关、防冰保护和高温保护确保操作绝对安全。
8.
Both have been developed to exhibit high peeling strength and to facilitate PCB manufacturing process.
即使是在较低的温度下操作，也能轻易的做到高良率的产出。
9.
The following procedures must be performed when changing the temperature of the stored water or resetting the high limit control.
在改变贮存的水温，或重置高温限制控制器时，请务必按照下列步骤操作。
10.
Start the engine and allow it to reach normal operating temperature.
启动引擎并使之达到正常操作温度。
11.
Monitor temperature control of exposure room. Safely operae.
曝光室监控温度、护机器操作安全。
12.
a collider that operates at very low temperatures.
在非常低的温度下能操作的加速器。
13.
Transmission Operation and Shift Scheduling at Various Oil Temperatures.
在各种油温下的变速操作和排挡调度
14.
Causes for operation in the wrong temperature shift schedule:
在错误温度换挡调度时操作的原因
15.
The Application of the Embedded Operating System at Control of Furnace Temperature;
嵌入式操作系统在炉温控制中的应用
16.
operand cache control
操作数超高速缓存控制
17.
The results showed that instability of operation temperature and increase in space velocity and pressure would cause deterioration of the activity stability, resulting in shorter service cycle.
结果表明，操作温度的不平稳、空速及压力的提高均会造成催化剂活性稳定性变差，运转周期缩短。
18.
Avoid ALL contact with Glue and wear protective and safety goggles whenever dealing with any component of the Glue System.
操作该涂胶系统的任何组件时，务必避免接触高温胶并配戴防护眼镜。