1.
Pre-plating cleaning for parts to be plated,oil and dirt removing for metal mechanical.Parts,cleaning semi-conductor Si-chips,spectacle frames and glass vessels.
电镀零件镀前清洗、五金机械零件去油圬。半导体硅片、眼镜架、玻璃器皿等。
2.
The Application of Selective Plating Technique in Repairing Components of Port Machinery
电刷镀技术在港机零件修复中的应用
3.
Recovery of Shafts and Axles by Combing Induction Remelting with Coating and Brush Plating
感应熔涂技术与电刷镀结合修复轴类零件
4.
Common electroplating products, electronic components, paint-decorated hardware and other water stripping, oil stripping and baking.
一般电镀制品、子零件、饰制品及其他脱水、油与烘乾。
5.
Electroless Plating Bright Ni-P Alloy Coating on Aluminum Lamp Finishing Parts
铝材灯饰零件化学镀光亮Ni-P合金镀层
6.
dicraft article and machine part
离子镀工艺品和机械零件
7.
Improvement Improvement of Hot Dip Galvanizing Techniques for Threaded Type of OCS Fittings
螺纹类接触网零件热浸镀锌工艺改进
8.
Technical requirements of quality control for metal parts to be coated
GB/T12611-1990金属零(部)件镀覆前质量控制技术要求
9.
The steel member is chromium plated on those surfaces with which the seal interacts.
钢质零件上与密封唇接触的表面以镀铬。
10.
Application of Membrane Separation Technology on Zero Emission of Electroplating Effluent
膜分离技术在电镀废水零排放上的应用
11.
Summarizes continuous plating processes for electronic connector assemblies including gold, palladium and, tin plating solutions, properties of the films, and continuous plating equipment.
综述了接插件连续镀金、、的电镀工艺，包括设备、液和镀层性质。
12.
All internals have been selected for their anti-corrosion properties; include chromium plated mild steel, brass and stainless steel parts.
所有内部零件均以防蚀性质参考选用，包括镀铬钢、铜与不??件。
13.
electrical parts of machinery or apparatus
机器或设备的电器零件
14.
The process is making or fabricating? production materials,? production or service parts, assemblies, or? heat treating, welding, painting, plating or other finishing services.
进行生产或装配产品原材料产品维修零件或总装件或热处理喷漆电镀或其他最终加工服务的过程
15.
Whet her electroplating quality is good or bad depends on pre-treatment.
铝制件电镀质量的好坏，预处理是关键。
16.
Electroplated coatings on threaded fasteners
GB/T5267-1985螺纹紧固件电镀层
17.
Iron Plating Under Normal Temperature for Repairing Component Parts with Long Bore,
常温镀铁工艺在深孔类零件修复和强化中的应用
18.
Research on Enhancing the Contact Fatigue Strength of Cast Iron Machine Elements with Alloy Coating and Alloying
表面合金镀层和合金化提高铸铁机械零件接触疲劳强度研究