1.
coarse corded pottery shreds
饰有绳纹的粗陶碎片
2.
At the lower, older level, coarse, cord-marked pottery has been found together with a fine, soft fragile pottery decorated with incised line, perforations and occasionally painted.
从年代较远的底层出土的是绳纹粗陶和精细易碎的软陶，后者有划花、贯孔，间中更有彩绘。
3.
Surface roughness for electronic ceramic parts
GB/T13841-1992电子陶瓷件表面粗糙度
4.
Microstructure of Coarse-grained BaTiO_3 Ceramics and Its Effects on Electric Properties
粗晶粒BaTiO_3陶瓷的微观结构及电学性能
5.
" Yixing is known as the capital of pottery in China. Yixing pottery is made of coarse-grained red, green, or purple clay that is known as "purple sand." "
宜兴被称为中国陶都。宜兴陶是用一种质地粗糙的红色、绿色或紫色陶土制成，该陶土称"紫砂"。
6.
Experiment Study on the Surface Roughness of Vita Mark II in Dental Finishing;
Vita Mark II齿科陶瓷磨削表面粗糙度的试验研究
7.
The Prediction Model and Experiment Research of Ceramics Surface Roughness
陶瓷磨削表面粗糙度预测模型与实验研究
8.
The Influence of Surface Roughness Treatment on the Impulse Characteristic of Machinable Insulation Material
表面粗糙处理对可加工陶瓷冲击闪络特性研究
9.
A METHOD OF DEFECT ANALYSIS FOR CERAMIC TILES BASED ON VARIABLE PRECISION ROUGH SET
变精度粗糙集模型在陶瓷砖缺陷分析中的应用
10.
On-line monitor surface roughness of engineering ceramic in high speed deep grinding
高速深切磨削陶瓷工件表面粗糙度的在线监测
11.
Earthenware: Pottery that has been fired at low heat and is slightly more porous and coarser than stoneware and porcelain.
陶器:一种烧成温度未到玻化点的陶器,渗水性比石陶器和瓷器稍大,也较粗糙。
12.
"Terra-cotta：Fairly coarse, porous clay that, when fired, assumes a colour ranging from dull ochre to red."
赤陶:经烧制后其颜色从淡赭到红色不等的粗而多孔的黏土。
13.
ceramics keystone (excl. of siliceous fossil meals or similar siliceous earths) refractory
陶瓷拱顶石（不包括硅质化石粗粉或类似硅质）,耐火的
14.
ceramic heat-insulating block of siliceous fossil meals or similar siliceous earths
陶瓷砌块，隔热的硅质化石粗粉或类似硅质土制的
15.
Study on the Optimizing of Wire Electrical Discharge Machining Process Parameters in Engineering Ceramics and the Prediction of Surface Roughness;
工程陶瓷WEDM加工工艺参数优化及表面粗糙度预测研究
16.
Study on Surface Roughness of B_4C Ceramics by EDM and Multiobjective Optimization;
碳化硼陶瓷微小孔放电加工的表面粗糙度研究和多目标优化
17.
Research on the Effect of Diamond Wheel Grinding Parameters on Ceramic Machined Surface Roughness;
金刚石砂轮磨削参数对陶瓷加工表面粗糙度影响的研究
18.
The Comparative Study on Both the Surface Roughness and the Adhesion of Streptococcus Mutans on Both Zirconia Ceramic and Titanium Alloy;
氧化锆陶瓷和钛合金的表面粗糙度与细菌粘附的比较研究