1.
amplitude of wave-exited ship bending
波浪引起的船体弯矩幅值
2.
APPLICATION OF TRANSFER MATRIX METHOD FOR ANALYZING TORSION-BENDING-COUPLED VIBRATION OF SHIP HULL
迁移矩阵法在船体弯扭耦合振动分析中的应用
3.
A Study on the Approximate Distribution of Extreme Wave Moment of Ship
关于船体波浪弯矩极值分布的近似分布规律的研究
4.
Then, the compound method is used to assess the hull girder ultimate strength reliability of a bulk carrier subjected to extreme bending moments.
最后，基于极限强度，将该组合方法用于评估散货船在极值弯矩作用下的船体梁安全性。
5.
Study and Calculations of Capsizing Moment of Circumfluence on Ships in Curving Channels
弯道中环流对船舶产生的倾覆力矩计算分析
6.
IDENTIFICATION OF BENDING MOMENT LOADINGS RESULTING IN CRACK DAMAGE OF CLUTCH CASE
导致离合器壳体破裂的弯矩载荷识别
7.
The ultimate longitudinal strength of container ships was analyzed by a simplified method.
用简化方法对集装箱船进行了垂向弯矩和水平弯矩联合作用下的极限强度分析。
8.
Moment Amplification Factors of Columns in Frame-Flexural Bracing Systems and the Overall Elastic Stability;
框架—弯曲型支撑体系中框架柱的弯矩放大系数及整体弹性稳定
9.
This increases both the rigid body rotation of the vehicle and the bending moment.
这既增加了飞行器的刚体转动，也增加了弯矩。
10.
Moment Redistribution in Prestressed Continuous Steel-concrete Composite Beams with External Tendons;
体外预应力钢—混凝土连续组合梁的弯矩调幅
11.
Theoretical and Experimental Study of Secondary Moment on Concrete Frame Beams with External Pre-stressed Tendons;
体外预应力框架梁次弯矩的理论与实验研究
12.
Buckling Coefficient of Steel and Concrete Composite Beams with External Tendons Under Negative Bending
体外预应力组合梁负弯矩下的稳定系数
13.
Fluid-structure Interaction Analysis of Bending-torsion Coupling Vibration of Thin-walled Ship Hull;
船体薄壁梁弯扭耦合振动的流固耦合分析
14.
The Experimental Research on High-strength Hull Ribs Processing of Spring-back and Sidewise Bending
高强度船体肋骨加工回弹及旁弯的实验研究
15.
This paper presents the theory and method of analyzing horizontal-torsion-coupled dynamic behavior of a ship hull with large hatch opening by the transfer matrix method.
提出了用迁移矩阵法分析长大舱口船弯扭耦合动力特性的理论和方法。
16.
Global Stability Research of Beams under the Loading Combined Antisymmetric End Moments with Transverse Uniformly Distributed Load;
反对称端弯矩和横向均布载共同作用下梁的整体稳定性研究
17.
Buckling of Stepped Columns & Moment Amplification Factor of Columns in Frame-Shear-flexural Bracing Systems;
阶形柱的稳定及框架—弯剪型支撑体系中框架柱的柱端弯矩放大系数
18.
The beams are designed with respect to the bending moment.
梁是按照弯矩设计的。