1.
Research on Numerical Simulation for the Process of Blanking-welding Drive Axle Housing;
冲压焊接式驱动桥壳成形过程数值仿真研究
2.
Research on Hydraulic Design and Application on Stamping and Welding Multistage Pump;
关于冲压焊接多级离心泵水力设计的研究
3.
Optimum Design and CFD Analysis on Stamping and Welding Multistage Stainless-steel Centrifugal Pump's Impellers;
不锈钢冲压焊接多级离心泵叶轮优化设计及CFD分析
4.
Quasi-Unsteady Numerical Simulation of the Impeller-Volute Coupling Characteristics in Stamping-Welding Centrifugal Pump;
冲压焊接离心泵叶轮及蜗壳耦合特性准非定常数值模拟
5.
Study on the Design Methods and Shaping Technologies of the Stamped-welded Centrifugal Pump s Impeller;
冲压焊接离心泵叶轮设计方法和成型工艺的研究
6.
Design Optimization and Computer Simulation on Horizontal Stamping and Welding Multistage Centrifugal Pump
卧式冲压焊接多级离心泵的设计优化及计算机模拟
7.
Weld identification single hole punch.
鉴别焊缝的单孔冲压机
8.
Study of Stamping Formability of Laser Welded Blanks and the Optimization of Weld-line Location;
激光拼焊板的冲压成形性分析及焊缝位置优化
9.
Theoretical Study on Stamping Formability of Spot Welding Tailored Blanks;
点焊拼接板冲压成形性能的理论分析
10.
Research on Weld Movement and Springback for TWB of U-shaped Part in Sheet Metal Forming
拼焊板U形件冲压成形中焊缝移动与回弹的研究
11.
Basic knowledge in welding and associate components.
基本焊接与冲压/伸模具的相关部件知识。
12.
Study on TWB Stamping Forming and TWB Optimizing Design;
拼焊板冲压成形规律及板坯优化设计研究
13.
Analysis on probability density of voltage signal of pulse MIG welding for aluminum alloy
铝合金脉冲MIG焊电压信号概率密度分析
14.
The application of the algorithm for tailor welded blank in the numerical simulation of sheet metal stamping
冲压成形仿真中的拼焊板坯剖分算法及应用
15.
Study on the arc tracking system of all-position pulsed TIG welding under high-pressure environment
高压环境下全位置脉冲TIG焊弧长跟踪系统研究
16.
Influence of initial stress of thin pressing parts on welding hot cracking susceptivity
薄壁冲压件初始应力对焊接热裂纹敏感性影响
17.
The Lacunas and Countermeasures of the Stainless-steel Centrifugal-pump Made by Pressing and Jointing;
冲压不锈钢焊接成型离心泵使用过程中的主要缺陷与对策
18.
Welding stability pattern recognition used SVM base on approximate entropy of voltage signal
基于电压信号近似熵对铝合金脉冲MIG焊过程稳定性SVM模式识别