1.
Analysis of Causes of Roll-cut Inefficiency on Driving-drum Spinle Key-slot of DSP160/1000 Type Belt Conveyer
DSP160/1000带式输送机传动滚筒轴键槽滚切失效成因分析
2.
There all the stalks and stalk fragments are eliminated from the bunches, and the berries are gently broken with the help of rubber grooved rollers.
那里所有葡萄茎和茎片段从中被挑出,剩下果实经过橡胶凹槽滚筒柔和的碾碎。
3.
nonfilling slot type bearing
无滚珠槽的滚动轴承
4.
troughing idlers
(皮带机用)槽形布置托滚
5.
The chains are pressure lubricated.
滚筒开槽。滚筒的高、速端带有通风式气胎离合器。
6.
Mobbing Chip flutes of Milling Cutters by Means of using an Involute Gear Hob
利用加工渐开线齿轮滚刀滚切铣刀容屑槽
7.
The Computation of Camber Values in the Spiral Chip Room of Maching Rolling Tools
加工滚刀螺旋容屑槽时中凸值的计算
8.
A groovelike part of a machine in which a moving part slides or rolls.
沟槽机器上的槽状部分，运动部件可在其中滑动或滚动
9.
To increase the contact area and permit larger loads to be carried, the balls run in curvilinear grooves in the rings.
为了增加接触面积并承受较大载荷，滚珠在内外环的曲线槽内滚动。
10.
Influence of Graduation Error of Dividing Disk on Error of Hob Chip Pocket Accumulated Pitch
滚刀开刃磨床分度盘误差对滚刀容屑槽周节累积误差的影响
11.
Finite Element Method Simulation and Experimental Research on Spirally Grooved Tube Roll-Pressing Process;
螺旋槽管材滚压成型的数值模拟及实验研究
12.
This revolves in a circular stone channel, into which an attendant feeds linseed.
译文：石滚沿着一个环形石槽作圆周运动，石槽旁边有一人专门负责往槽里装亚麻籽。
13.
Basically, they are the same kind of Dao, its single side with ball bearing fuller, and it is lower than the double side.
基本都是同一类的刀姿，这枝是单边滚珠槽的，工艺难度比双边滚珠的要低些。
14.
A game played by rolling a ball down a wooden alley in order to knock down a triangular group of ten pins.
保龄球戏一种在木制滚球槽中滚球以击倒三角状放置的十个木瓶的游戏
15.
Rolling bearings--Snap ring groove and snap ring on outer ring--Dimensions and tolerances
GB/T305-1998滚动轴承外圈上的止动槽和止动环尺寸和公差
16.
A Way to Fix the Chip Flute Number for the multiple Thread Hindley Hob
确定多头直廓环面蜗轮滚刀客屑槽数的一种方法
17.
One of a series of small ridges or grooves on the surface or edge of a metal object, such as a thumbscrew, to aid in gripping.
滚花金属物体表面或边缘上的一系列小峰或凹槽，如指旋螺钉，使更容易握紧
18.
Taper support Rib : Rib conical taper at the circumferential rib support, in between the cam groove, Roller Cam with the circumference of linear contact.
锥度支撑肋：锥形肋位于锥度支撑肋的圆周上，在凸轮凹槽之间，与凸轮滚子的圆周线性接触。