1.
Study on Microstructures and Properties of Nitrided Surface Layers of Titanium and Its Alloy by Nitrogen Plasma Flame
钛及钛合金氮等离子焰表面氮化层的组织和性能研究
2.
The nitride on oxide layers remains intact.
氧化物表层上面的氮化物保持原状不动。
3.
Study on Wear Properties of Modified Layers Prepared on 38CrMoAl Nitrided Steel
38CrMoAl氮化钢表面改性层摩擦磨损性能研究
4.
Study of Microstructure and Nitride in Ion-nitrided Pure Iron with High Resolution Electron Microscope;
纯铁表面离子渗氮层显微组织及氮化物的高分辨电子显微镜研究
5.
Study on Microstructures and Wear Properties of the Coatings Fabricated on Titanium Alloy by Laser Alloying with Nitrogen Gas, Boron and Graphite Powders;
钛合金表面激光硼碳氮合金化层的组织结构与耐磨性能研究
6.
Laser Nitriding of Titanium Alloy and Hydroxyapatite Layer Deposition on the Surface;
钛合金表面激光氮化改性及其HA复合涂层的制备
7.
Study of AlPO_4-Si_3N_4 Sol-Gel Coating Modified on Nitride Composite's Surface
AlPO_4-Si_3N_4溶胶-凝胶涂层对氮化物复合材料表面改性的研究
8.
Two-step nitrocarburizing process to obtain the single-phase ε compound layer on steel surface
钢表面获得单相ε化合物层的二段氮碳共渗工艺
9.
Mechanochemical Method to Prepare Aryl Diazonium Salts Monolayer on Silicon Surfaces
基于机械—化学方法硅表面芳香烃重氮盐单层膜的制备
10.
Simulations of surface nitridation and nitride precipitation in alloy steels have beeb carried out with cellular automaton modeling.
应用元胞自动机模型对合金钢表面氮化及扩散层中氮化物沉淀过程进行了计算机模拟。
11.
TiN Layer Preparation on TA2 Substrates by Nitrogen Arc;
利用氮电弧在TA2基体上制备TiN表面层
12.
The finished part shall have a nitride case depth that does not exihibit porosity that extends deeper than the outer half of the nitride case depth.
成品件外表面渗氮，只允许在渗氮层的靠外表面的渗层一半深度存在缩孔。
13.
Effect of Nitriding Temperature on Microstructure and Properties of Plasma Nitriding Layer of 3Cr13 Stainless Steel
渗氮温度对3Cr13不锈钢表面离子渗氮层组织和性能的影响
14.
An Investigation of TiN Coatings Prepared by Electrospark Deposition under Nitrogen Atmosphere;
氮气氛下电火花沉积含TiN表面层的研究
15.
Influence of nitrocarburizing on microstructure and roughness of 4Cr10Si2Mo steel
氮碳共渗对4Cr10Si2Mo钢渗层组织和表面粗糙度的影响
16.
The effects of surface treatment such as ion plating, ion implantation, laser surface treatment, shot peening, coating and nitriding on prevention of fretting corrosion are described in detail.
详述了离子镀、子注入、光表面处理、丸、盖层和氮化等对材料抗摩振腐蚀的作用。
17.
Surface Nanocrystallization and Plasma Nitriding of Pure Titanium at Low Temperatures
纯钛表面纳米化及低温离子渗氮研究
18.
Optimization of bath composition for electroless copper plating on aluminum nitride ceramic surface
氮化铝陶瓷表面化学镀铜溶液组成的优化