1.
Applications of Macro Program in Mine Oblique-axis Axial Piston Pump Cylinder Manufacturing
宏程序在矿用斜轴泵缸体加工中的应用
2.
Numerical simulation of contact problems in high pressure reciprocating pump systems
高压往复泵缸体系统接触问题数值模拟
3.
Remove the water pump from the cylinder block.
从汽缸体上拆去水泵。
4.
The chamber of a pump from which fluid is expelled by a piston.
缸泵内由活塞从中排出流体的空室
5.
jacket water circulating pump
气缸套冷却水循环泵
6.
Application of welding technology with protective CO_2 gas system to repair liquid cylinder of mud pump;
二氧化碳气体保护焊在泥浆泵液缸修复中的应用
7.
"Gaskets are also used to seal joints between other parts, such as between the oil pan, manifolds, or water pump and the Block."
密封垫也同样用于密封其它部件之间的接合处,例如,油底壳、歧管、水泵与气缸体之间的密封。
8.
Dynamic characteristic of flow of triplex pump based on angle of delay of pump valve.
基于泵阀滞后角的三缸泵流量动态特性
9.
operating width
缸体宽度（转子机）
10.
The Researching of the Power End of the DP100-5 Three Cylinder Single Acting Diaphragm Pump;
DP100-5三缸单作用隔膜泵动力端研究
11.
Characteristic Analysis and Applied Research on the Hydraulic Differential Cylinder Controlled by Variable Speed Pump;
变速泵控差动缸特性分析与应用研究
12.
Research on the Contamination Sensitivity of Cylinder Bore and Piston Pair in Hydraulic Piston Pump;
海水泵缸孔柱塞副污染磨损机理研究
13.
The Application of Iron Nickel Rare Earth Alloy in Cylinder Liner of Mud Pump;
铁镍稀土合金在泥浆泵缸套上的应用
14.
Research on a Novel Electrohydraulic Pump Control Differential Cylinder System
一种新的电液泵控差动缸系统的研究
15.
Control System of Constant Pressure and Speed Duplex Pump Based on ARM9
基于ARM9的恒压恒速双缸泵控制系统
16.
Position the cylinder heads onto head gaskets and cylinder block.
将汽缸盖安置到汽缸盖罩垫和汽缸体上。
17.
Remove the crankshaft from the cylinder block (refer to Cylinder Block Disassemble).
从汽缸体上卸去曲轴（参看“汽缸体－拆卸”）。
18.
Place pump inside pot with the electrical cord running outside of the drainage hole, then use a silicone sealant to seal the hole.
把水泵固定在缸里，电线通过排水口拖到缸外，用硅胶把洞封好。