1.
Determination of ignition losses in cathode carbonate
GB/T10304.12-1988阴极碳酸盐灼烧失重的测定
2.
Method for determination of ignition loss of alundum powder
GB/T9489.10-1988刚玉粉灼烧失重的测定方法
3.
Methods for chemical analysis of tungsten--The gravimetric method for the determination of loss content on ignition
GB/T4324.30-1984钨化学分析方法重量法测定灼烧损失量
4.
Limestone for chemical industry--Determination of content of loss on ignition--Gravimetric method
GB/T15057.10-1994化工用石灰石中灼烧失量的测定重量法
5.
Magnesite refractories--Determination of loss content on ignition--Gravimetric method
GB/T5069.1-1985镁质耐火材料化学分析方法重量法测定灼烧失量
6.
Magnesite-chrome refractories--Determination of loss content on ignition--Gravimetric method
GB/T5070.1-1985镁铬质耐火材料化学分析方法重量法测定灼烧失量
7.
Methods for chemical analysis of aluminium hydroxide--The gravimetric method for the determination of loss content on ignitio
GB/T6610.2-1986氢氧化铝化学分析方法重量法测定灼烧失量
8.
Methods for chemical analysis of aluminium oxide--The gravimetric method for the determination of loss content on ignition
GB/T6609.2-1986氧化铝化学分析方法重量法测定灼烧失量
9.
Phosphate rock and concentrate--Determination of loss on ignition--Gravimetric method
GB/T1875-1995磷矿石和磷精矿中灼烧失量的测定重量法
10.
Methods for chemical analysis of bauxite ores--The gravimetric method for determination the loss content on ignition
GB/T3257.21-1982铝土矿化学分析方法重量法测定灼烧失量
11.
The act or process of cauterizing.
烧灼烧灼的行为或过程
12.
Ignition loss:Burn the test sample at 1000°C to sapecified quantity and measure the reduction.
烧失量：将试样于1000度温度灼烧1小时之减量。
13.
P: It's a kind of burning pain. It seems to be getting worse.
是一种烧灼痛，而且好像越来越重。
14.
glowing resistance
耐烧灼性,耐灼热性
15.
In severe or refractory cases, cauterization of the individual lesions with nitrate has been used.
在严重或顽固性病例中，个别的可用硝酸盐烧灼。
16.
Commentary of "Determination of loss on ignition in iron ore by gravimetric method"
《铁矿石灼烧减量的测定重量法》标准述评
17.
Sodium tripolyphosphate and sodium pyrophosphate for industrial use--Determination of loss ignition
GB/T9984.5-1988工业三聚磷酸钠和焦磷酸钠灼烧损失的测定
18.
After drying at 110℃ and weighing the mater is ignited at 450℃ and reweighed.
样品在110℃下烘干，称重，然后于450℃下灼烧并再次称重。