1.
Macro-segregation Elimination in Al-9Gr Monotectic Alloy
Al-9Gr轴瓦合金控制宏观偏析的研究
2.
Preparation of Carbon-nano-tubes/tin-based Compound Anti-friction Coating
碳纳米管/锡基轴瓦合金复合减摩镀层的制备
3.
Experimental Study of Effects of Different Surface Treatments with Bush Alloy on Sliding Bearings
轴瓦合金表面不同处理方式对滑动轴承性能影响的试验研究
4.
Babbits are known as the superior bearing metal in anti-friction property,butsince their lower fatigue strength,bearing of these metals are apt to crack and spalling,whenthey serve in high load condition.
巴氏合金是减摩性最好的轴承材料,但是其疲劳强度低,在高载荷下轴瓦合金层容易开裂剥落。
5.
Low Ni High Mn Cu-Al Alloy Bush for Hot Plate Mill
低镍高锰铜铝合金轴瓦新材料的研究
6.
By comparing on the manufacturing technology of the sliding bearing in different works, a new manufacturing technology is given so as to improve on the gluey condition of babbit of the sliding bearing.
比较不同工厂滑动轴瓦的制造工艺，提出新的工艺，从而改善滑动轴瓦锡基轴承合金的粘合情况。
7.
By checking the large hanging type asynchronous motor for the gluey condition of babbit of the sliding bearing, a quality problem of the bearing is found.
通过检查大型悬挂式异步电动机滑动轴瓦锡基轴承合金粘合情况，找出轴瓦存在的质量问题。
8.
STUDY ON QUALITY IMPROVEMENT OF CENTRIFUGAL CAST BABBIT METAL
提高离心浇铸巴氏合金轴瓦质量的研究
9.
Research on Application of Vacuum Vapor Plating Technique for Forming Antifriction Alloy Coating on Bush
轴瓦减摩合金薄膜真空蒸镀技术的应用研究
10.
Repair of ZchSnSb11-6-0 axle bush on lifting electrical machinery
主扇风机电机巴氏合金轴瓦的焊接修复
11.
Optimization of Casting Process for Manufacturing Babbitt Metal Bearing Bushings Used in Diesel Engines and Experiment Verification
柴油机轴瓦巴氏合金浇注工艺优化及试验验证
12.
A bushing or similar lining for a bearing, made from a copper alloy.
铜套或铜衬垫用铜合金制的轴承轴瓦或套筒式衬垫
13.
Based on tests and practice,the optimum“three temperature”for adhesion quality between plain bearing and babbitt metal in the process of pouring babbitt metal on bearing is put forth.
在试验和实践的基础上，提出轴瓦浇铸过程中轴瓦与白合金粘着质量的最佳“三温”
14.
Study of New Graphite Particle/Al Alloy Matrix Self-lubricating Bearing Material
新型石墨颗粒/铝合金复合自润滑轴瓦材料的研究
15.
The Study on Running-in and Wear Properties of Crankshaft-bearing Shell of Diesel Engine
柴油机曲轴-轴瓦磨合磨损性能研究
16.
The alloy is suitable for making wear resistant parts such as bush, axle sleeve and worm wheel etc. undor the conditions of high and middle load at the middle and low speed.
合金主要用于制作高、中载,中低速不同工况条件下工作的轴瓦、轴套、蜗轮等耐磨件。
17.
upper guide-metal
上导轴瓦乌金 -水轮发电机
18.
Second Suggestion for Developing Bimetal Strip for Friction Resistant Bush
开发耐磨轴瓦用双金属带材的再建议