说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 无机富锌底漆
1.
As intermediate paint with high rust resistance for hull coated with epoxy zinc-rich primer and inorganic zinc-rich primer. Outstanding compatibility with topcoat.
主要用于船体喷过环氧富锌底漆无机富锌底漆等高性能防锈的中间漆与底、面漆的配套性极佳。
2.
Preparation and construction of a workshop primer of waterborne inorganic zinc silicate
水性无机硅酸锌车间底漆的制备和施工
3.
Two components, zinc-rich epoxy-polyamide primer.
双组分,聚酰胺固化环氧富锌底漆。
4.
Good adhesion on zinc-rich primers or galvanized coatings.
对富锌底漆或喷锌层表面具有优良附着力。
5.
Primer painting: Zinc Rich Weld able primer to be applied from both sides35 to40 microns.
涂装底漆:在板材两面涂敷35-40微米厚的富锌可焊接底漆。
6.
Apply to sandblasted steel. Miscellaneous zinc shop-primer.
施工于正确喷砂处理的钢材上,可复涂在富锌车间底漆上。
7.
Compatible with any zinc-free primers.
底漆可以是不含锌粉的各种油漆。
8.
Some of the commonly specified coatings include epoxies, coal tar derivatives and sacrificial zinc primers.
通常采用的涂层包括:环氧树脂,煤焦油衍生物和无锌底漆。
9.
Study on Preparation and Properties of Inorganic Flake Zinc-Rich Coating;
片状无机富锌涂料的制备和性能研究
10.
According lo the binder type zinc dust paint may be classified into three groups, inorganic, organic, and organic- inorganic hybrids types.
锌粉漆根据基料可分为无机、机和有机/机掺合3种类型。
11.
Comparison and Study of Pseudo Zn-Al Alloy, Metal Aluminum and Inorganic Zinc-rich Coating Systems
锌铝伪合金、金属铝和无机富锌涂装体系比较研究
12.
Study on Water-borne Inorganic Zinc-rich Paints Modified by One-dimensional Nanomaterials
一维纳米材料改性水性无机富锌涂料的研究
13.
cleaning and priming machine
除锈-涂底漆联合作业机
14.
Preparation of High SiO_2/K_2O Molar Ratio Potassium Silicate Waterborne Inorganic Zinc-rich Paints and Studies on Its Performance;
高模数硅酸钾水性无机富锌涂料的制备及性能研究
15.
Special Anti-rust Coating Inorganic Zinc-rich Connections in the Application of High Strength Bolts
特制无机富锌防锈防滑涂料在高强度螺栓连接中的应用
16.
Compatible with epoxy or polyurethane primers.
底漆一般采用环氧底漆或聚氨脂底漆。
17.
Preparation and performance study of organo-silicon permeation-type primer
有机硅渗透型底漆的制备及性能研究
18.
Apply on properly blast cleaned steel or directly over inorganic zinc coating in good condition.
施工于适当处理的钢材表面上,或直接施工于状态良好的无机富锌涂层之上。