1.
Selective Laser Sintering of Nylon12 Filled by Talc
滑石粉填充尼龙12的选择性激光烧结成型
2.
mechanical properties and interfacial interaction of polyamide 6 filled with CaCO3 modified by coupling agents and acrylaniide AAM surface Polymerization through Ultraviolet Irradiation;
表面光聚合处理无机填料及其填充尼龙6体系结构与性能的研究
3.
Study on the Properties of Oil-Bearing MC Nylon by Filling Inorganic Particles;
无机微颗粒填充含油铸型尼龙的性能研究
4.
Preparation and Characterization of PA66/ Vermiculite Composites and PA66/Nucleating Agents Composite;
蛭石填充复合及成核剂改性尼龙66的制备与表征
5.
Theory of Viscosity Decrease of PA66 Filled with CaCO_3 by Different Size and Size Distribution
碳酸钙级配填充引起尼龙66剪切黏度降低的机理分析
6.
Investigation into Influences of Filling Formats of Foam Material Filled Steel Tubes on Component Damping Property
填充方式对泡沫材料填充钢管构件阻尼性能影响的研究
7.
Sequence and Depositional Characteristics in Syn-rift stage,Sunda Basin,Indonesia
印尼Sunda盆地裂陷期层序地层与沉积充填特征
8.
The indoor experiment on the filling materials used for downward slicing drift mining with cemented bacKfill in Gaolong Gold Mine was performed.
对高龙金矿下向分层进路胶结充填采矿法所用的充填材料进行了室内试验研究。
9.
Study on the Relationship Between Flame-retardant and the Overall Stabilization Effect of Polypropylene Filled with Deflam
敌火龙(Deflam)填充PP材料的热稳定性能与阻燃性能关系研究
10.
The thickness of an item, such as a down comforter, that is filled with compressible insulating material.
羽毛被的厚度填满了压缩绝缘材料的某种物品的厚度，如尼龙被
11.
Structure and Properties of Nylon 1010 Modified by Using Ethylene-Vinyl Acetate Rubbers and Inorganic Fillers
乙烯—醋酸乙烯酯橡胶和无机填料改性尼龙1010的结构与性能研究
12.
The Mooney viscosity of oil-extended rubber extended same amount of cycloalkyl oil increased with the increases of the Mooney viscosity of latex.
胶乳的门尼粘度越高,填充相同份数环烷烃油后其充油橡胶的门尼粘度也越高。
13.
To fill plentifully, as with money or food.
填充用钱或食物填满
14.
To stuff, as for roasting.
填充填料，可供烤炙
15.
Analysis of filling effect and filling ratio of backfill mining in longwall face
长壁工作面充填开采的充填比与充填效应分析
16.
smaller scour-and-fill feature
小型充刷-充填形态
17.
0 - Clip (Default);1 - Isometric;2 - Stretch
-剪裁(默认值);1-等比填充;2-变比填充
18.
Study on Ion-exchange Packing Materials in EDI Stacks and the Packing Forms;
EDI膜堆填充材料及其填充方式的研究