1.
Flexural Modulus - 1% Secant (Based on ASTM D 790A)
挠曲模量–1%正割（根据ASTMD790A）
2.
The Dynamic Simulation Test Method in The Longitudinal Orientation of the Measuring Ship
基于测量船艏挠角模拟动态检测方法
3.
The Deflectional Curvature of the Non - Straight Gradual - Approach Curve and the First and Second Foundation Measure in the Surface;
曲面上非直线的渐近曲线的挠率与第Ⅰ、Ⅱ基本量的关系
4.
flexural fatigue
弯曲疲劳,挠曲疲劳
5.
flexural strain
挠曲应变,弯曲应变
6.
flexural resilience
弯曲回弹性,挠曲回弹性;弯曲回弹能,挠曲回弹能
7.
Aluminum borate whiskers modified by silane coupling agent to enhance bending force of PMMA
硅烷偶联剂用量对硼酸铝晶须增强PMMA挠曲强度影响的研究
8.
The effect of whisker fraction on flexural strength of whisker-PMMA composite reinforced with potassium titanate whiskers
钛酸钾晶须的添加量对晶须增强PMMA挠曲强度影响
9.
A DYNAMIC BENDING MODEL FOR LARGE DEFLECTION OF INCOMPRESSIBLE SATURATED ORTHOTROPIC POROELASTIC PLATES
饱和不可压正交各向异性多孔弹性大挠度板的动力弯曲模型
10.
Incorporate Modeling and Simulation of Transfer Alignment with Flexure of Carrier and Lever-arm Effect
传递对准中载舰挠曲变形和杆臂效应一体化建模与仿真
11.
crossbreaking strength
横断裂强度, 挠曲强度
12.
nonlinear flexible spacecraft
非线性挠曲宇宙飞船
13.
flex cracking test
（涂层的）耐屈挠龟裂强度试验,挠曲疲劳试验
14.
ANALYTIC SOLUTION OF BENDING SURFACE PROBLEM OF FAN-SHAPED PLATE
扇形薄板弯曲问题挠曲面的解析解
15.
Generally Spiral Trajectory Curvature Center of Curvature and Torsion
一般螺线曲率中心轨迹的曲率与挠率
16.
On the Calculation of the Curvature and Torsion of Curves =+a+b
关于曲线=+a+b的曲率和挠率的计算
17.
The equivalent elastic modulus was deduced by comprehensive considering deflection and elastic modulus.
通过综合考虑挠度引起弹性模量和弹性伸长引起弹性模量推导出等效弹性模量。
18.
Multivariable Experimental Identification and Adaptive Inverse Control of Flexible Structures with Close Modes;
密集模态挠性结构的多变量实验辨识及自适应逆控制