1.
plastics solidification of radioactive waste
放射性废物塑料固化
2.
Characteristic requirements for solidified waste of low and intermediate level radioactive waste--Plastic solidified waste
GB14569.2-1993低、中水平放射性废物固化体性能要求塑料固化体
3.
Plastics are classified into two types-thermoplastics and thermosets.
塑料分成两类:热塑塑料和热固塑料。
4.
Study on the curing reaction kinetics of epoxy electrician molding compound
环氧电工塑料的固化反应动力学研究
5.
Test method for rectangular flow cure properties of thermosetting moulding compounds
GB/T5472-1985热固性模塑料矩道流动固化性试验方法
6.
Thermoplastic and thermosetting substances are called plastics.
热塑塑料和热固的物质称为塑料。
7.
Study on Latent Curing Agent of Epoxy Resin Sheeting Molding Compounds;
环氧树脂片状模塑料潜伏性固化体系研究
8.
Study on the Management of Waste Thermosetting Plastics Recycling;
废弃热固塑料资源化利用管理对策研究
9.
The team then created solid plastic that contains a special chemical.
后来研究小组还成功研制了一种由特殊化学材料构成的固体塑料。
10.
Fluorocarbon elastomers are inherently compatible with a broad spectrum of chemicals.
氟塑料弹性材料的固有特性是与广泛的化学光谱相容。
11.
The catalyst in the solid plastic then reacts with the liquid monomer.
接着，在固体塑料中的催化剂会随着液体单体一起反应，
12.
Test method for chemical resistance of glass fiber reinforced thermosetting plastics
GB/T3857-1987玻璃纤维增强热固性塑料耐化学药品性能试验方法
13.
Synthesis and characterization of tung-styrene oil thermosetting plastics lased on tung oil oxidization
桐油氧化引发桐油-苯乙烯热固性塑料的合成与表征
14.
the chief solid component of mammalian urine; synthesized from ammonia and carbon dioxide and used as fertilizer and in animal feed and in plastics.
哺乳动物尿中主要的固体成份，可由氨和二氧化碳合成，用作肥料、饲料和制塑料。
15.
Bonds firmly2 different materials showing high thermal dimensional change such as a metal plate and a plastic plate.
两种不同材料的牢固粘接，能显示高温下材料（金属牌和塑料牌）尺寸的变化。
16.
The thermosetting plastic screw is a key part in the thermosetting plastical injector.
热固性塑料螺杆是热固性塑料注射机的关键部分之一。
17.
Preparation method for compression moulding of specimens of thermosetting moulding materials
GB/T5471-1985热固性模塑料压塑试样制备方法
18.
Performance of thermoset rubber but processed like thermoplastic.
热固性橡胶之性能，热塑性塑料之加工方法 .