1.
High Temperature Mechanical Behavior of a Cast Nickel-base Superalloy with Low Cost
一种低成本镍基铸造高温合金的高温力学行为
2.
RULE OF SEGREGATION OF ALLOYING ELEMENTS IN CAST Ni-BASE SUPERALLOYS
镍基铸造高温合金中合金元素的偏析规律
3.
Improvement of Hot Corrosion Resistance of Casted Nickel-base Superalloy M17L;
镍基铸造高温合金M17L抗热腐蚀性能的改善
4.
Creep Rupture Behavior of a Cast Ni-base Superalloy at High Temperature
一种铸造镍基高温合金的高温蠕变断裂行为
5.
INFLUENCE OF Hf ON WELD CRACKING FOR CAST NICKEL BASE SUPERALLOYS
铪对铸造镍基高温合金焊接裂纹的影响
6.
The Effects of Tantalum and Ruthenium on the Microstructures and Properties of Low Chromium and High Tungsten Content Cast Nickel-Base Superalloys;
Ta和Ru对低Cr高W铸造镍基高温合金组织及性能的影响
7.
Microstructure of high Cr content cast Ni-base superalloy K4648
高Cr铸造Ni基高温合金K4648的显微组织
8.
Study on Co-based Superalloy K6509
钴基铸造高温合金K6509的研究
9.
cast Alnico hard magnetic alloys
铸造铝镍钴硬磁合金
10.
Microstructure and Properties of Large Nickel-Base Superalloys Castings Processed by Different Derectinal Solidification Techniques
两种定向凝固大尺寸镍基高温合金铸件的组织与性能
11.
EFFECT OF CYCLIC STRESS ON CREEP RUPTURE STRENGTH OF A CAST SUPERALLOY WITH HIGH Al AND Ti CONTENTS
循环应力对一种高铝钛铸造镍基合金持久强度的影响
12.
The Research on Mechanism of GH4133B Superalloy after Fatigue at Elevated Temperature;
镍基高温合金GH4133B的高温疲劳行为研究
13.
Microstructure and Property of High-strength Heat-resistant Cu-Ni-based Alloy Prepared by Centrifugal Casting
离心铸造高强耐热铜镍合金的组织和性能研究
14.
A nickel-base cast alloy with low expansion coefficient - A new material for welding clamp
低膨胀系数镍基铸造合金—新型焊接夹具材料
15.
Microstructures Comparison of Stellite 6 Alloy by Self-Propagating High-Temperature Synthesis and Cast HS111 Alloy
自蔓延高温合成钴基Stellite 6合金和铸造HS111合金微观组织(英文)
16.
Development of Cast Superalloys for Gas Turbines in Our Country
我国燃气涡轮用铸造高温合金的发展
17.
Research on cutting procedure of casting high temperature alloy K423A;
铸造高温合金K423A的切削加工性能研究
18.
Microstructure and Mechanical Properties of Cast Ti1100-xNb High Temperature Titanium Alloy
铸造Ti1100-xNb高温钛合金组织与性能