1.
However, if the yarns are packed too tightly, the fabric will have reduced tearing strength, abrasion resistance and wrinkle recovery.
但是,如果纱线密度过大,织物的撕裂强度、耐磨强度及折皱恢复能力会降低。
2.
Microstructure and Wear Resistance of NR400 High Strength Bainite Wear-resistant Steel Plate
NR400高强度贝氏体耐磨钢板的组织与耐磨性能
3.
The Research of the Heat Treatment of the Low-alloy High Strength Steel
低合金高强度耐磨钢热处理工艺研究
4.
Advantage: Strong intensity, antifriction, wearable, anti-rotten, acid and alkali resistant, simple and portable, safety and applicable.
优点：强度大、耐磨、耐用、耐腐烂、耐酸碱，简易轻便，安全适用。
5.
Studies on Strength and Toughness of Ultra-high Hardness，Wear-resistance and Cracking-resistance Hardfacing Materials;
超高硬度耐磨抗裂堆焊材料的强韧化研究
6.
Sliding Wear Resistance Mechanism of Filler Modifled PTFE Materials with Special Reference to Their Strength;
填充改性聚四氟乙烯材料的强度耐磨机理研究
7.
Strength and abrasion resistance of pavement manufactured sand cement concrete
路面机制砂水泥混凝土的强度与耐磨性研究
8.
Research and Application of High Strength Wear Resistant Cutting Blade Material
高强度平地机刀片铸钢耐磨材料的研制与应用
9.
colour fastness to chafing
耐磨擦色牢度,耐磨损色牢度
10.
For extrudates there are side crushing strength tests, bulk crushing strength tests, abrasion tests.
对挤条产品有侧压强度的测试，堆积强度测试和耐磨测试。
11.
colour fastness to rubbing off
耐擦净色牢度,耐磨擦色牢度;[涂层]耐磨色牢度
12.
Production choosing β titanium alloy after heat treatment could increase the high temperature intensity and wear off with hardness of HRC42.
选择β钛合金材质生产，经热处理后增加高温强度及耐磨性，硬度HRC42。
13.
Stainless steel screen made of high-grade and solid stainless steel wire, has many advantages, such as high intensity, acid and alkali endurable, high temperature endurable, pressing endurable, and so on.
不锈钢筛用优质、坚固的不锈钢丝制成，具有强度高、耐酸碱、耐高温、耐压磨等优点。
14.
Study on Abrasion Resistance of Laminate Flooring
强化木地板耐磨性能及国产化耐磨纸的研究
15.
durability coefficient
耐用系数（耐磨次数与强力损失之比）
16.
It has characteristics as follows:perfect adhesion,hot-resistance,abrasion performance,easy using.
该产品附着力强、耐热、耐磨、使用方便。
17.
colour fastness to rubbing with organic solvent
耐有机溶剂中磨擦牢度
18.
Application of argon arc local strengthen can increas e hardness and high-temperature wear resistance of the ring groove.
采用氩弧局部强化可提高环槽的硬度和高温耐磨性。