1.
corrosion allowance
腐蚀余度;腐蚀余量;腐蚀裕度;允许腐蚀度;允许磨蚀度
2.
stress corrosion threshold intensity factor
应力腐蚀界限强度因子
3.
A High Degree of Corrosion Resistance,Temperature Resistance,Wear Resistance,High Toughness Heavy Duty Coatings:ChemLINE 784
高度耐腐蚀、耐温、耐磨、高韧性重防腐蚀涂料ChemLINE 784
4.
preserve...from rancourous envy of the rich- Aldous Huxley.
不为对富裕的满怀恨意的嫉妒所腐蚀——奥尔德斯·贺胥黎。
5.
Reliability Analysis for Residual Strength of Corroded Oil and Gas Piping
油气腐蚀管道剩余强度的可靠度分析
6.
We inspect etch channel density of the seed piece by piece.
低腐蚀隧道：为确保低腐蚀隧道密度，我们对晶种的腐蚀隧道密度进行逐块检测。
7.
Effect of Ageing Condition on SCC Resistance and Exfoliation Corrosion Behavior of 7475 and 7050 Al Alloys
时效制度对7475和7050铝合金应力腐蚀及剥层腐蚀性能的影响
8.
CORROSION FATIGUE MECHANISM OF HIGH STRENGTH ALUMINUM ALLOY AND FULL-LIFE ENGINEERING MODEL FOR CORROSION FATIGUE
高强度铝合金腐蚀疲劳机理与腐蚀疲劳全寿命工程模型
9.
They appear to be very sensitive to mildly corrosive environments.
它们似乎对轻度的腐蚀环境非常敏感。
10.
Determination of corrosion of engine lubricating oils
GB/T391-1977发动机润滑油腐蚀度测定法
11.
Normally for bulk glass, etching increases the strength.
对于块状玻璃，腐蚀通常都使强度提高。
12.
Characteristic of products: strong, anticorrosion, ageing resistance.
产品特性：强度大、抗腐蚀、抗老化。
13.
Experimental Research on Chloride Threshold Level for Reinforcement Corrosion;
钢筋腐蚀临界氯离子浓度的试验研究
14.
Research on Concrete Resistivity and Reiforced Concrete Steel Corrosion Rate
混凝土电阻率及钢筋腐蚀速度的研究
15.
Predicting Residual Strength of LC4 Aluminium Alloy Structure by Pre-corroded Test
LC4铝合金结构腐蚀损伤剩余强度预测
16.
Development of Temperature Control System of Corrosive Liquid Based on ADuC812
基于ADuC812的腐蚀液温度控制系统研制
17.
INFLUENCE OF Cl~- CONCENTRATION ON CREVICE CORROSION OF X70 PIPELINE STEEL
Cl~-浓度对X70管线钢缝隙腐蚀的影响
18.
Corrosion Resistance of Electroplated NI-SiC Composite Gradient Coating
Ni-SiC复合梯度镀层的耐腐蚀性能