1.
ON FORMING THE NRK BILLET IN THE POTTERY UTENSILS IN THE CREATION OF RE-CREATION;
谈手拉坯成型的器皿在陶艺创作中的再创造
2.
Study of Solidification Heat Transfer Mathematical Model for Dynamic Withdrawal Process in Slab Continuous Casting;
板坯连铸动态拉坯过程凝固传热数学模型研究
3.
Research on blank shape and drawing process of asymmetric box part
非对称盒形工件拉深毛坯与成形设计
4.
While throwing, not only the contract ratio, but also the shapes, should be paid much attention to.
拉坯不仅要注意到收缩比，而且还应注意到造型。
5.
Study on the Mathematical Model of Solidification Thermal Transmission in the Process of Continuous Casting Slab with Speed Changing;
连铸板坯变拉速过程凝固传热数学模型研究
6.
Freeze Casting of Reaction Bonded Silicon Carbide;
反应烧结碳化硅坯体的冷凝浇注成型
7.
He throws a bowl from a ball of clay.
他用拉坯轮机把一团粘土加工成了一只碗。
8.
He throws a plate from a ball of clay.
他用拉坯轮机把一团粘土加工成了一个盘子。
9.
EXPERIENCE OF REVAMPING SMALL BELGIAN MILL TO CONTINUOUS CASTING BLOCK TO FINISHED PRODUCTION WITHOUT REHEATING
横列式小型轧机改造成用连铸坯—火成材的经验
10.
Study on Near-net-shape Hot-pressing of Mg Extruded Preform
镁合金挤压预成形坯模压近终成型工艺研究
11.
Application of Constant-distance Forming Process in Producing Abrasive Tool Blank
定程成型工艺在磨具毛坯生产中的应用
12.
Research and Design of Fuzzy Controller for Blank Moulding of Plastic Blower;
吹塑机坯成型模糊控制器的研究与设计
13.
Study on Laser Machining of Green Bodies of Ceramics Prepared by Different Forming Methods
不同成型方法制备陶瓷坯体的激光加工研究
14.
Effects of Injection Molding Parameters on Feedstock Density of Pure Copper Powder Injection Molding
成型参数对纯铜粉末注射生坯密度的影响
15.
Calculation and practice of thermal unbending pressures for big round bloom casters
大圆坯拉矫机热坯压力的计算与实践
16.
Effect of Continuous Casting Mold Oscillation Parameters on Slab Surface Cracks Formation Under High Casting Speed
高拉速连铸结晶器振动参数对板坯表面裂纹形成的影响
17.
salad bowl of porcelain or china
瓷或白坯瓷制沙拉碗
18.
In the second stage, room temperature preforms are reheated, stretched and blow moulded into bottles, in a reheat stretch blow moulding machine.
第二步将室温的瓶坯再加热后，拉吹成为瓶子，是在另一台“再加热，拉吹机”上完成。