1.
Qualification Test of Welding Craft for SA213-Super304H and HR3C Steel
SA213-Super304H、HR3C钢焊接工艺评定试验
2.
Comprehensive Evaluation And Practical Confirmation on Processing Technology of Daphne genkwa Sieb. et Zucc.
芫花炮制工艺的综合评价及中试验证
3.
A Study on Pipeline Installation Technology of Horizonal Directional Drilling in Rock
岩层水平定向钻进铺管施工工艺的试验研究
4.
Orthogonal test of decorative and protective chromium plating process Part III-Evaluation methods and standards for deposits
装饰防护镀铬工艺的正交试验研究 第三部分──镀层的评定方法和标准
5.
Research of the aspirin ointment preparation technology and stability experiment;
阿司匹林软膏制备工艺及稳定性试验研究
6.
Determing the optimum process conditions of cyclohexanol dehydrogenation with the orthogonal test;
应用正交试验确定环已醇最佳工艺条件
7.
Experiment on blueing technique of low-carbon steel for electromotor stator of micro electric pump
微泵电机定子用低碳钢蓝化工艺及性能试验
8.
The Quenching Procedure Test of SA387Gr11CL2
SA387Gr11CL2钢淬火工艺试验
9.
Standard for quality inspection and evaluation of petroleum construction engineering Installation of steel technological pipeline inside station
石油建设工程质量检验评定标准站内钢质工艺管道工程
10.
Study on Micro-electrolysis, Fenton Reagent and Immobilized Microorganism Technique Combination Processes in Dyeing Wastewater Treatment;
微电解-Fenton试剂—固定化生物技术复合工艺处理染料废水的试验研究
11.
Orthogonal test with indices scores for optimizing sand burning process of drynaria rhizome
多指标评分正交试验法优选砂烫骨碎补的炮制工艺
12.
Study on β-cyclodextrin inclusion compound of notopterygium and angelica essential oil with multiple indicator test probability of full-scale
多指标试验全概率评分法对羌活、当归混合挥发油包合工艺的研究
13.
abrasion resistance assessment by jet test
喷射试验法评定耐磨性
14.
The Research and Development of Highway Test and Check and Quality Inspection and Evaluation Integrate System;
公路工程试验检测与质量检验评定一体化系统研究与开发
15.
By means of test of orthogonal experimental design and searching test, optimum recipe of electrolyte and technological process were found.
通过正交试验，确定了最佳的镀液配方和工艺条件。
16.
Trial Research by Hydrolysis Acidification Stabilization Pond Process Treatment Sewage of Shihezi Development Area;
水解酸化—稳定塘工艺处理石河子开发区污水试验研究
17.
The Welding Parameters of Ω Weld Seam Chosen on the Basis of the Methods of Orthogonal Test Design;
基于正交试验设计的Ω焊缝焊接工艺参数的确定
18.
The Research on Treatment of Lamivudine Wastewater by Combined Process Using Micro-electrolysis and Fenton
微电解—Fenton联合工艺处理拉米夫定废水的试验研究