1.
The bubbling bed model can then be used for scale up and design of kinetic processes.
可以用鼓泡床模型来进行动力学过程的放大和设计。
2.
Direct Particle Simulation of Air and Particle Motions in Bubbling Fluidized Bed;
鼓泡流化床流动特性的直接数值模拟
3.
CFD Simulation of Gas-Liquid Flow in Bubble Column with Two-bubble Phase Population Balance Model
双气泡相群平衡模型模拟鼓泡塔气液两相流
4.
Numerical simulation of flow behavior of gas and particles in bubbling fluidized bed with large eddy simulation approach
大涡模拟方法模拟鼓泡床内气固两相流动
5.
Segregation of Multiple Solid Phases by Soft-sphere Simulation in Bubbling Fluidized Beds
鼓泡流化床中多组分颗粒分离的软球模拟
6.
Influence of Grid and Numerical Schemes on Bubble Column Simulation with TBPBM-CFD Model
网格和数值格式对TBPBM-CFD模型模拟鼓泡塔的影响
7.
Study on the Cold State Experiment and CFD Simulation of Bubbling Fluidized Bed of Synthesize Si_3N_4;
流态化合成氮化硅的鼓泡床冷模试验与CFD模拟研究
8.
Study on the Thermal State Experiment and CFD Simulation of Bubbling Fluidized Bed of Synthesis of Si_3N_4;
流态化合成氮化硅的鼓泡床热模试验与CFD模拟研究
9.
Study of Effect Factors on Accuracy in CFD Transient Simulation of Gas-Liquid Bubble Column
气液鼓泡床瞬态行为模拟准确性影响因素的研究
10.
Second-order moments of particles for dense gas-solid flow and numerical flow behavior simulation in bubbling fluidized bed
稠密气固两相流动的颗粒二阶矩方法及鼓泡床流化特性的模拟
11.
COMPARISON OF DESULFURIZATION PERFORMANCE BETWEEN CONVENTIONAL AND NOVEL JET BUBBLE REACTOR WITH PIERCED CYLINDRICAL GAS INLET DEVICE
新型喷射鼓泡塔与传统鼓泡塔脱硫的性能比较
12.
A Pressurized Blister Test Model for the Interface Adhesion of Dissimilar Elastic-plastic Materials;
鼓泡法表征韧性膜/韧性基底界面结合能的理论模型
13.
Technology of Shop-assembled Circulating Combustion Bubbling Fluidized Bed Boiler
鼓泡床循环燃烧组装/快装锅炉技术
14.
Numerical Simulation of Transient Characteristics in Bubble Column Reactors;
鼓泡反应器瞬态性能的数值模拟研究
15.
CFD Simulation of Two Phases Flow in Bubble Column;
鼓泡塔内气液两相流动的CFD模拟
16.
Establishment of a clinical predictive model for resected pure bronchioloalveolar cell carcinoma and its prognostic analysis
手术切除单纯型细支气管肺泡癌临床预测模型的建立及预后分析
17.
We develop only the expressions for vigorously bubbling beds.
我们只推导出对于剧烈鼓泡床的表达式。
18.
Mass Transfer Characteristics of Gas-Liquid in a Slurry Bubble Column Reactor under High Temperature and High Pressure;
高温高压下浆态鼓泡床气液传质特性的研究