1.
Cause of the Wet-steam Cool- condensation Jar Cracking and Revamping Schemes in Titanium Dioxide Powder Plant of Pangang;
攀钢钛白粉厂湿蒸汽冷凝罐开裂原因及改造方案
2.
coagulation-flocculation jar test of water
水的混凝、絮凝杯罐试验方法
3.
Preliminary Study on the Cause of Formation of Ceiling Condensed Water in Canning Department of Canning Factory,Its Hazardous Effects,Prevention and Control Measures
罐头生产企业实罐车间天花板冷凝水成因危害及防治措施初探
4.
The Design of the Kettle of the Concrete Agitate Lorry Based on the Pro/e;
Pro/e环境下的混凝土搅拌车罐体的设计
5.
Analysis on the External Walls of the Prestressed Concrete LNG Storage Tank under Seismic Response
预应力LNG储罐混凝土外墙地震响应分析
6.
The Application of CATIA in Concrete-Mixer Drum Helical Curve
CATIA在混凝土搅拌罐螺旋线设计中的应用
7.
Analysis of seismic damage of 24 tank bodies upperly supported on the reinforced concrete frame
钢筋混凝土框架上部支承24个罐体的震害分析
8.
Numerical Simulation of Temperature and Stress of Underground Double-wall Concrete Oil Tank
地下混凝土双壁储油罐温度应力数值模拟
9.
Cold Insulation Concrete Foundation Construction Technique of Low Temperature Storage Tank with Double Metal Walls
双壁金属低温储罐保冷混凝土基础施工技术
10.
In this paper， demolition of an all-buried reinforced concre te acid-pond by water-pressure bla sting is introduced.
用水压爆破方法拆除一个全埋式钢筋混凝土酸罐池。
11.
The co-ncentrator is jacket structure, the condenser is tubular and the cooler is coil-type.
浓缩罐为夹套结构，冷凝器为列管式，冷却器为盘管式。
12.
Cover the bottom with pebbles. Screw on the lid. Decorate the lid, if you wish.
在罐底铺满小鹅卵石，凝上盖子。愿意的话，还可以装饰一下瓶子。
13.
Study of Experiment Model of Prestressed Lightweight Concrete Platform Tank;
预应力轻骨料混凝土采油平台罐体模型的试验研究
14.
Design and Research on the Drum and Blade of Concrete Mixing Truck for Low Stump Concrete;
低塌落度混凝土搅拌运输车罐体及叶片设计与研究
15.
Finite Element analysis And Design of The Pre-stressed Concrete Barrel-Type Sealing Digestive Tank;
预应力混凝土筒形密封消化罐的有限元分析与设计
16.
Preloading Monitoring Methods for Large Oil Tank in Algeria 5MTPY Condensate Project
阿尔及利亚凝析油项目大型油罐充水预压动态监控方法
17.
This equipment mainly consists of six stainless steel parts such as concentrator, the first condenser, separator, the second condenser, cooler, accumulator.
本设备主要包括浓缩罐、一冷凝器、液分离器、二冷凝器、却器、液桶六个不锈钢部件组成。
18.
Heating Schemes for Transport of High-pour-point and Viscous Crude Oil Long-stored in Tanks under Atmospheric Temperatures
常温条件下油罐长期储存易凝高黏原油后输转作业加热方案的选择