1.
Research on Accelerated Wear Mechanism for 3Cr13 Sprayed Coating Under Abrasive Particles Lubrication
含磨粒润滑条件下3Cr13涂层加速磨损机理研究
2.
Wear Mechanism on 3Cr13 Coating under Accelerated Condition of Dry Friction
干摩擦条件下3Cr13涂层的加速磨损机理研究
3.
Research on gear′s fretting in wind power station
风电系统中加速齿轮的微动磨损研究
4.
In addition, the surface microstructure and the morphology have been observed by scanning electron microscopy( SEM) and X-ray diffraction.
结果表明随着磨损载荷、擦速度的增加，摩擦系数有所减小。
5.
Research of Microstructure and Wear Properties of M3/2 Powder Meatallurgy Highspeed Steels Reinfored by TiC Particles;
添加TiC颗粒的M3/2粉末高速钢的组织与磨损性能研究
6.
This concentration of stre further accelerates cartilage wear with thi ing of outer layers and propagation of cracks and fi ures in the deeper layers.
集中的应有尽有力进一步加速外民支软骨磨损及变薄，也加速深层碎裂和裂隙的扩布。
7.
Determination of Muzzle Velocity Loss by Law of Bore Wear
由炮膛磨损规律确定火炮初速减退量
8.
Composite Surface Strengthening of 40CrNiMoA Steel and Property of High Speed Abrasion;
40CrNiMoA复合表面强化及高速磨损性能
9.
Study on Fractal Prediction of Gear Wear;
汽车变速箱齿轮磨损的分形预测研究
10.
The Reasons for Wear and Tear of Bearings in Deceleration Devices Used in Coal Mines and Relevant Countermeasure;
煤矿减速器轴承位磨损的原因及对策
11.
Study on the Tool Wear Mechanism and Tool Life for High-Speed Milling Titanium Alloy Ti6Al4V
高速铣削钛合金Ti6Al4V的刀具磨损研究
12.
The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy.
对硬质合金整体立铣刀高速铣削加工航空铝合金时的刀具磨损形态及其磨损机理进行了观察和分析。
13.
Application of Electrical Technology to Monitor the Ball Milling Process and reduce the Rate of Wear of the grinding Media
应用电技术监控球磨过程并减小磨矿介质的磨损速度
14.
Preliminary Study on Wear Characteristics and Wear Process Simulation of Grinding Roll in MPS-190 Type Medium Speed Mill
MPS-190型中速磨煤机磨辊磨损特性及过程仿真的初步研究
15.
The Load map and wearing maps of the crankshaft journals and crankpin are obtained under various operating conditions.
研究表明：气缸压力和转速升高后，曲柄销和主轴颈的磨损均呈现增加趋势。
16.
The Fatigue Wear and Wear-resistance of EDM Layer of Cold Stamping Die
冷冲模电火花加工层的疲劳磨损与耐磨性
17.
The Research of Friction Wear of Internal Combustion Engine Bases on The Method of Heating Analysis of Ferrograms;
分析内燃机的磨损磨粒—利用铁谱加热法
18.
Friction and Wear Properties of KM-type Lubricating Oil Anti-wear Additive for Diesel Locomotive
内燃机车KM型抗磨添加剂的摩擦磨损性能研究