1.
The welding res etter especially for the big-size,complicated and demanding products.
针对焊接面积大而复杂,焊接要求高的产品，焊接效果优越。
2.
Features,high thermal efficiency,deep melting,fast welding with good effect,shaping well,low labor strength.
热效率高，焊深大，焊接速度快，焊接效果好，成型效果好，成型美观，劳动强度低。
3.
"Attempting to braze a contaminated or improperly cleaned surface will result in an unsatisfactory joint.
在已经弄脏或不正确清洗的表面上进行钎焊，焊接效果就很难令人满意，
4.
Weld whose heat resource is the laser, also owns the advantage such as low heat input and small heat deform.
以激光为热源的焊接同样也可以得到低热输入、变形量极少的效果。
5.
Treatment Effect of Ceiling Mechanical Ventilation of Welding Workshop in Mechanical Plant
某机械制造厂焊接车间屋顶机械通风治理效果评价
6.
Welding flux greatly improved the efficiency of welding.
焊剂的使用大大提高了焊接的效率。
7.
Study on High Efficient Bonding and Repaired Welding Process of TA15 Titanium Alloy;
TA15钛合金高效焊接及补焊工艺研究
8.
Thermal effects of gas tungsten arc welding for thick copper plates at different welding condition
不同焊接条件下TIG焊接紫铜厚板的热效应研究
9.
Researches on the early failure of TP347H and 12Cr1MoV dissimilar steel welded joints
TP347H与12Cr1MoV异种钢焊接接头早期失效研究
10.
The General Efficiency Comparison of Φ1.2 and Φ1.6 Welding Wire for Welding Heavy and Medium Plate
Φ1.2和Φ1.6焊丝焊接中厚板综合效率的对比
11.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
12.
"They can do welding if they want."
“如果愿意的话，她们也可以当焊接工。”
13.
Welding quality will also decline if there is strong air movement around the working ambience.
如果焊接环境有较强的空气流动，也可能造成焊接质量下降。
14.
Innovating in High-efficiency Welding Technology to Construct a Green Shipbuilding Enterprise;
创新高效焊接技术，打造绿色造船企业
15.
Research on Strain Aging for X80 Grade HSAW Steel Pipe
X80级螺旋埋弧焊接钢管应变时效研究
16.
Welding failure analysis of tin coating for the terminal electrode of MLCC
MLCC端电极Sn镀层的焊接失效分析
17.
Analysis on Welding Failure of Terminal Electrode of Multilayer Ceramic Capacitors by SEM
基于SEM的MLCC端电极焊接失效分析
18.
Ceramic welding linning is mainly applied in high efficiency welding technology, which has a function of single surface weld but double surface forming.
陶持焊接衬垫主要应用在高效焊接工艺中，起到单面焊接双面成型的作用。