1.
Finite Element Analysis of Elastoplastic Crack Tip Stress State for Assessing Constraint and Thickness Effect
弹塑性裂纹尖端应力约束及厚度效应的有限元分析
2.
The influence of specimen's thickness on JR curves, the curve of driving force for crack growth and the method of its determination are also discussed.
研究了J_R曲线受试样厚度的影响。 还介绍了弹塑性裂纹扩展推力曲线及其确定方法。
3.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
4.
Elastic-plastic fracture analysis of multiple-cracks with two-parameters under biaxial loads
双向荷载下多裂纹弹塑性双参数断裂分析
5.
Near Crack Line Plastoehstic Andysis of mode ⅢEdge Cracked Plates LoadedbyPoint Forces
Ⅲ型边裂纹受一对集中力时裂纹线场的弹塑性分析
6.
Higher-Order Asymptotic Solution of Growing Cracks in Elastic Perfectly Plastic Media
理想弹塑性材料扩展裂纹尖端场高次渐近解
7.
The Elastic-viscoplastic Field at the Tip of a Dynamic Propagating Crack in Power-hardening Materials
幂硬化材料动态扩展裂纹尖端的弹粘塑性场
8.
Boundary Element Method for Elastoplastic Bimaterial Interface Crack Problems;
弹塑性双材料界面裂纹问题的边界元法
9.
Elastic-Plastic Finite Element Analysis for Circumferential Part-Throughwall Cracks on Mitered Elbow;
斜接弯管环向内表面裂纹弹塑性有限元分析
10.
Elastic-Plastic Finite Element Analysis for Piping Elbow with Circumferential Part-Throughwall Cracks;
含内表面环向裂纹光滑管弹塑性有限元分析
11.
Elastic-Plastic Finite Element Analysis for Piping Elbow with Axial Inside Surface Cracks;
光滑弯管沿轴向内表面裂纹弹塑性有限元分析
12.
The Elastic-viscoplastic Field at the Mixed-mode Steadily Propagating Crack-Tip under Compression and Shear;
压—剪混合型定常扩展裂纹尖端的弹粘塑性场
13.
The Elastic-viscous-ideally Plastic Field at the Tip of Mode Ⅲ Steadily Moving Crack;
Ⅲ型定常扩展裂纹尖端的弹—粘—理想塑性场
14.
THE ASYMPTOTIC ELASTIC-VISCOPLASTIC FIELD AT MODEⅡDYNAMIC PROPAGATING CRACK-TIP
Ⅱ型动态扩展裂纹尖端的弹黏塑性渐近场
15.
The Research of J～* Integral in Elastic-Plastic Fracture Mechanics and Fracture Criterion for Mixed Mode Crack Propagation;
弹塑性断裂力学之J～*积分与复合型裂纹扩展断裂准则的研究
16.
Elastic-Plastic Fracture Analysis for Internal Axial Surface Half Elliptical Cracks in Oil & Gas Pipeline
油气管道内部轴向表面半椭圆裂纹弹塑性断裂分析
17.
Based upon the near crack-tip elastic analysis, estimates of the size and shape of the plastic zone will be developed.
根据裂纹尖端附近的弹性分析，来研究塑性区的形状和大小的计算。
18.
elastic plastic fracture mechanics
弹性 塑性断裂力学