说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 梯度界面层
1.
The Mechanism Study of Gradient Interface Layer Improving the Compatibility of Polyolefine/ Ultra Fine Inorganic Powder Blends;
梯度界面层改善聚烯烃/超细无机粉体共混体系相容机理的研究
2.
Interfacial Reaction of Single Crystal Particulate Reinforced WC_p/Ti-6Al-4V Graded Composites Coating Produced by Laser Melt Injection
激光熔注单晶颗粒增强WC_p/Ti-6Al-4V梯度复合材料层的界面反应机理
3.
The Analysis of the Effect of Non-parallelism and Pressure Gradient on the Stability of Boundary Layer;
边界层稳定性的非平行性和压力梯度作用研究
4.
Analysis of the Acoustics and the Functionally Graded Coatings by Boundary Element Method;
边界元法分析声场及功能梯度涂层结构
5.
Research of Ni-P Gradient Coating and Ni-P/SiC Gradient Coating;
Ni-P梯度镀层及Ni-P/SiC梯度镀层研究
6.
Fracture and Gradient Enhanced Damage Model in Interface Stress Element Method and Its Application in Engineering;
界面元法的开裂和损伤梯度模型及其工程应用
7.
Study of the Mode Ⅲ Interfacial Crack-tip Considering the Strain Gadient Effect;
考虑应变梯度效应Ⅲ型界面裂纹尖端场的研究
8.
The Heat Transfer Mechanism of Material [Liquid-Solid] Rheologic Shaped Interface and the Extablishment of Shaped Interface Based on the High Grad of Change of Temperature;
材料[液—固]流变界面传热机理与高梯度温变成型界面的建立
9.
Study of Biomimetic Gradient Nano-composite Coatings on Metal Materials Surface;
金属材料表面仿生梯度纳米复合涂层的研究
10.
Preparation of TiO_2-FHA-HA Gradient Coatings on Ti Substract;
钛合金表面TiO_2-FHA-HA梯度生物陶瓷涂层的制备
11.
The Preparation of Graded Coating of Ni-Al Intermetallic Compound on the Surface of Copper;
Cu表面Ni-Al金属间化合物梯度涂层的制备
12.
Layered modeling algorithm for free surfaces of parts from FGM
梯度功能材料零件自由曲面分层建模方法
13.
Research of Corrosion Resistance on Ni-P Gradient Coating on 45 Steel Surface
45钢表面梯度Ni-P合金镀层耐蚀性能研究
14.
Research on the Production of Iron-based Gradient Alloy Coating Using Plasma Jet Surface Metallurgy
等离子束表面冶金制备铁基梯度涂层的研究
15.
Dispersion of surface wave in a functionally graded electro-magneto-elastic layered plate
电磁功能梯度材料层合板中表面波的弥散特性
16.
Character of Fe-Si transition gradient layer generated on surface of 6.5%Si steel sheet by siliconizing
渗硅制备6.5%Si硅钢表面Fe-Si过渡梯度层的特性
17.
Using Roughness Surface on Control of Supersonic Laminar Flow Boundary Layer
用表面粗糙度控制超声速层流边界层
18.
On Fracture Mechanics Problems in FGMS by Using Layered Material Boundary Element Method;
用层状材料的边界元法研究功能梯度材料中的断裂力学问题