1.
Research and Application on Torque Measurement System of Wind Turbine;
风力发电机组轴系扭矩测试系统的研究与应用
2.
Device of shaft alternative torque and torsional vibration test of marine main engine
船舶主机轴系交变扭矩与扭振测试装置
3.
Nominal torque series of the mechanical coupling
GB/T3507-1983机械式联轴器公称扭矩系列
4.
Study on Traction Control System for Four Wheel Drive Vehicle Based on Inter-axle Torque Distribution
基于轴间扭矩分配的四轮驱动汽车牵引力控制系统研究
5.
Regression Analysis of Relationship Between Axial Force and Torque of High-strength Bolt Connecting Steel Structure for Boiler Based on Experiment Data
基于试验数据的锅炉钢结构高强度螺栓轴力与扭矩关系回归分析
6.
Development of Dynamic-torque Measure System Based on the Cam-turn-angle of Diesel Fuel Pump
基于凸轮轴转角的油泵瞬态扭矩检测系统的研制
7.
Find the required length of key based on the torque value of the gross shaft.
根据整根轴的扭矩值求需要的键长。
8.
Using elastic wrench moment axle in the hollow axle of motor is a good way of setting elastic buffer device of transmission system.
在截割电机空心轴内使用弹性扭矩轴是设置传动系统弹性缓冲的好办法。
9.
Torque and Bending Moment in a Shaft with Combined Deformation Measured by Resistance Strain Gauge Method
电阻应变计法测量组合变形轴的扭矩和弯矩
10.
Dynamic Torque : the degree, the role of the output shaft torque.
动态扭矩：在分度期间，作用在出力轴上的最大扭矩。
11.
Exchange of Twisting Moment is Angle of Twint Curve for Cylinder Ipecimen of Plastic Metal with Various Diameter;
不同直径塑性金属圆轴扭转试验的扭矩——扭转角圆的相互转换
12.
Application of Torque Telemetry System in Rolling Mill Monitor
扭矩遥测系统在轧机扭矩监测中的应用
13.
torsional vibration of engine crankshaft
内燃机轴系扭转振动
14.
The measurement method on dynamic torque of power plant home and abroad is introduced.
介绍了动力装置动态扭矩测试的国内外现状和动力装置轴系动态扭矩直接测试法的原理和技术途径。
15.
This paper discusses the similarity method of imitating mechanical and electrical system, and with the help of four terminal parameter it also analyzes the main shaft torque response of grinder.
通过对机电系统相似模拟法探讨,利用四端参数法解决了粉碎机主轴扭矩响应求解问题。
16.
Study on the Coupled Torsional, Axial and Bending Three-Dimensional Vibrations of Internal Combustion Engine Shafting Basing on Exact Dynamic Stiffness Matrix Methods;
基于精确动态刚度矩阵法的内燃机轴系扭转、纵向及弯曲三维耦合振动研究
17.
The drive shaft must also be able to change in length while transmitting torque.
当传递扭矩时，传动轴必须还要能够改变长度。
18.
Pass Optimization Design of Bar Rolling Mills for Torque Uniform Distribution
棒材粗轧机组接轴扭矩均衡分配孔型优化设计