1.
Optimal Working Roll Diameter Configuration for Tandem Cold Rolling Mill Based on Taking Strip Reduction into Consideration
考虑带钢压下率的冷连轧机最佳工作辊径配置
2.
covering cambered bowl
中高轧辊,凸面轧辊（轧辊的包覆层车削成中间部分的直径大于两端的直径,以补偿轧辊的挠度）
3.
Approach to the Front and Rear Rubber Cots with Different Diameters for Ring Spinning Frames
细纱机前后胶辊不同直径问题的研讨
4.
Sirle-roll Drive and unegual Diameter Rolling for Cold Strip Mill
冷轧带钢轧机的单辊传动和异径轧制
5.
The Study on Cage Roll Forming Processes of Large-sized ERW Straight Welded-pipe;
大直径ERW直缝焊管排辊成型工艺研究
6.
Twin-roller eccentricity and different diameter caster with caster mouth of adjustable obliquity
铸嘴倾角可调的偏心异径双辊铸轧机
7.
Diameter of punched driving roller is large, suiting rewinding of large and small roll.
复卷驱动辊直径大，适应大小卷径的复卷。
8.
The turn roll of 600mm in diameter is mounted on the exit of turn roll room to guide strip into zinc pot.
为将带钢引入锌锅,在出口转向辊室装有一个直径为600mm的转向辊
9.
A New Way for a Further Development of Domestic-made Non-treated Cots
国产表面不处理胶辊再上台阶的新途径
10.
Experiment Research on Compacting Mechanism of Hollow Part with Equal Inner Diameter by 3-roll Cross Wedge Rolling
三辊楔横轧等内径空心件成形机理的实验研究
11.
Study on the influence law of the rolling curve affected by rolling radius during cam shaft cross wedge rolling
楔横轧凸轮轴轧制半径对辊形曲线影响的规律
12.
Finite element simulation of section deflection during the cross-roll straightening of the large diameter thin copper tube
斜辊矫直大口径薄壁铜管断面畸变的仿真分析
13.
Study on FEM Simulation of Cage Forming of Large-sized ERW Straight-welded Pipe
大直径ERW直缝焊管排辊成型的有限元模拟
14.
pressure roller
压紧辊，压实辊，压紧辊轮
15.
In order to meet with production needs, designed core roller diameter option Ruomuo Fig.
为满足实际生产需要,设计了芯辊直径选择的诺谟图。
16.
Application Study on Centrifugally-cast HSS Roll to Steel Tube Stretch Reducing Mill
离心铸造高速钢轧辊在钢管张力减径机上的应用研究
17.
Distributing Roller
均布辊; 排肥辊; (涂料)分配辊; (三辊磨的)匀料辊; (印刷)匀墨辊
18.
A highly polished finish that is applied to one side of the paper as it dries against the polished surface of a large-diameter cylinder on a papermaking machine.
中义纸张在制造乾燥过程中贴在一个大内径的辊筒上，会使纸面产生亮泽的效果。