1.
A small cogwheel that engages or is engaged by a larger cogwheel or a rack.
小齿轮，齿杆啮合大齿轮或被大齿轮或齿条啮合的小齿轮
2.
Worn teeth on ring gear or drive pinion gear.
环形齿轮或驱动小齿轮上齿磨损。
3.
pinion-and-rack steering
小齿轮和齿条转向装置
4.
rack and pinion gear
齿条与小齿轮传动装置
5.
Both gear centers have pinions with only half tooth.
两个齿轮其中心都有一个小齿轮，这个小齿轮只有半边有齿轮。
6.
The four main types of gears (spur, helical, worm, and bevel)and a rack and pinion are shown in Figure 7.
图7所示是四种主要的齿轮（巨齿轮，斜齿轮，蜗轮和伞齿轮）以及齿条和小齿轮。
7.
Install the pinion mate gears and thrust washers.
安装小齿轮配合齿轮和止推垫圈
8.
This large gear turns the small one to rotate the cylinder.
这个大齿轮带动小齿轮使滚筒旋转。
9.
Amending the Shape of Pinion and Reducing the Round-gear Error;
修正小齿轮表面齿形降低圆弧齿轮传动误差
10.
Excessive distance between pinion gear and flywheel/drive plate gear.
小齿轮和飞轮/驱动板齿轮之间距离过大。
11.
Electronic Pinion Factor Warning
电子小齿轮因子警告
12.
axle drive pinion adjusting sleeve
车轴传动小齿轮调整套
13.
motor-drive shaft and pinio
电动机传动轴和小齿轮
14.
End play in drive pinion bearings.
驱动小齿轮轴承的端隙。
15.
drive pinion cone bearing
主动小齿轮锥形轴承
16.
drive pinion cone bearing cup
传动小齿轮锥形轴承杯
17.
Pinion Preload Shims–Typical
小齿轮预荷－典型的
18.
differential pinion cross
差速器小齿轮十字轴